Performance and Economic Analysis of the Utilization of Construction and Demolition Waste as Recycled Concrete Aggregates

被引:5
|
作者
Yadav, N. [1 ]
Kumar, R. [1 ]
机构
[1] Sardar Vallabhbhai Natl Inst Technol, Dept Civil Engn, Surat, India
来源
INTERNATIONAL JOURNAL OF ENGINEERING | 2024年 / 37卷 / 03期
关键词
Construction and Demolition Wastes; Recycled Concrete Aggregates; Microstructural Characterization; Economic Analysis; Ultimate Compressive Strength; FLY-ASH; STABILIZATION; DURABILITY;
D O I
10.5829/ije.2024.37.03c.02
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Construction and demolition (C&D) wastes are increasing continuously with intensified construction activities worldwide resulting in ecological concerns. Recycling of these waste products into recycled concrete aggregates (RCA) in base and sub-base layers of pavement is one of the solutions for the problem. Thus, the present study is an in-depth investigation of the utilization of the RCA in construction sector containing laboratory tests, microstructural characterization, and economic analysis. The experiment revealed that, for each mix proportion, the maximum dry density decreases and the ideal moisture content increases as the cement percentage is increased. The 7 -day average ultimate compressive strength value for natural aggregates (NA) and recycled concrete (RCA) combined with additives met the requirements. The durability index for all the mix proportions was greater than 0.80. Finally, it was found that 17.86% of the material cost was saved with incorporation of RCA (50%) -NA (50%) for the construction of the sub-base layer of the pavement.
引用
收藏
页码:460 / 467
页数:8
相关论文
共 50 条
  • [1] Performance of construction and demolition waste as recycled aggregates in concrete - a review
    Trivedi, Shiv Sai
    Das, Bibhuti Bhusan
    Barbhuiya, Salim
    PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-CONSTRUCTION MATERIALS, 2024, 178 (01) : 20 - 47
  • [2] Durability performance of concrete with recycled aggregates from construction and demolition waste plants
    Bravo, Miguel
    de Brito, Jorge
    Pontes, Jorge
    Evangelista, Luis
    CONSTRUCTION AND BUILDING MATERIALS, 2015, 77 : 357 - 369
  • [3] Use of aggregates from recycled construction and demolition waste in concrete
    Rao, Akash
    Jha, Kumar N.
    Misra, Sudhir
    RESOURCES CONSERVATION AND RECYCLING, 2007, 50 (01) : 71 - 81
  • [4] Experimental and FEM Analysis for Fracture Performance Evaluation of Concrete Made with Recycled Construction and Demolition Waste Aggregates
    Ojha, P. N.
    Singh, Pranay
    Singh, Brijesh
    Singh, Abhishek
    Sagar, Amit
    Sagar, Amit
    PERIODICA POLYTECHNICA-CIVIL ENGINEERING, 2022, 67 (01): : 65 - 79
  • [5] The effect of the quality of construction and demolition waste on recycled aggregates concrete properties
    Bravo, Miguel
    de Brito, Jorge
    Evangelista, Luís
    Indian Concrete Journal, 2019, 93 (09): : 17 - 29
  • [6] Carbonation of concrete with construction and demolition waste based recycled aggregates and cement with recycled content
    Saez del Bosque, I. F.
    Van den Heede, P.
    De Belie, N.
    Sanchez de Rojas, M. I.
    Medina, C.
    CONSTRUCTION AND BUILDING MATERIALS, 2020, 234
  • [7] Sustainable utilization of recycled aggregates: robust construction and demolition waste reduction strategies
    De Luca, Angelo
    Chen, Linda
    Gharehbaghi, Koorosh
    INTERNATIONAL JOURNAL OF BUILDING PATHOLOGY AND ADAPTATION, 2021, 39 (04) : 666 - 682
  • [8] Mechanical and durability performance of concrete produced with recycled aggregates from Greek construction and demolition waste plants
    Alexandridou, Christiana
    Angelopoulos, George N.
    Coutelieris, Frank A.
    JOURNAL OF CLEANER PRODUCTION, 2018, 176 : 745 - 757
  • [9] Utilization of construction and demolition waste and synthetic aggregates
    Mohammed, Mona S.
    ElKady, Hala
    Abdel-Gawwad, Hamdy A.
    JOURNAL OF BUILDING ENGINEERING, 2021, 43
  • [10] Utilizing Construction and Demolition (C&D) Waste as Recycled Aggregates (RA) in Concrete
    Shahidan, Shahiron
    Azmi, Mohamad Azim Mohammad
    Kupusamy, Kumanan
    Zuki, Sharifah Salwa Mohd
    Ali, Noorwirdawati
    13TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT, 2017, 174 : 1028 - 1035