Experiment and simulation of rock fragmentation size of blasting crater

被引:0
|
作者
Fan Y. [1 ,2 ]
Wu J. [1 ,2 ]
Leng Z. [1 ,2 ]
Yang G. [1 ,2 ]
Cui X. [1 ,2 ]
Gao Q. [1 ,3 ]
机构
[1] Hubei Key Laboratory of Construction and Management in Hydropower Engineering, China Three Gorges University, Hubei, Yichang
[2] College of Hydraulic and Environmental Engineering, China Three Gorges University, Hubei, Yichang
[3] School of Highway, Chang'an University, Shaanxi, Xi'an
基金
湖北省教育厅重点项目; 中国国家自然科学基金;
关键词
blasting crater; crater bottom radius; explosive package burial depth; explosive package weight; fragment-size; rock mechanics;
D O I
10.13722/j.cnki.jrme.2022.0869
中图分类号
学科分类号
摘要
In order to study the change of blasting damage range and fragmentation distribution of single free face rock,firstly,the reflection law of explosion stress wave on single free surface was studied by optical refraction Snell law,and the bottom radius of blasting crater was determined. Then,combined with the field blasting crater experiment of Baima iron mine,the geometric characteristics and rock fragment size of blasting crater under different burial depths and weights of explosive packet were analyzed. And the continuous-discontinuous element method(CDEM) was used to simulate the morphological characteristics of blasting crater and rock fragment size. The results show that the blasting crater volume under unit explosive weight increases in the power type of explosive packet ratio weight,and raises first and then reduces with the grow of the explosive ratio burial depth. There is a maximum point when the ratio buried depth is 1.01. The fragmentation of blasting crater narrows with the increment of the charge weight,and expends with the growth of the charge buried depth. The average particle size of broken rock decreases with −19/30 power of the charge weight,and increases with 1.42 power of the charge buried depth. Finally,using the verified numerical simulation method,the rock breaking effect of blasting design with the large hole distance and small resistance line at the Xia'an creek in the Three Gorges Project was reproduced. It provides reference for analysis and prediction of rock blasting fragmentation in practical engineering. © 2023 Academia Sinica. All rights reserved.
引用
收藏
页码:2125 / 2139
页数:14
相关论文
共 31 条
  • [1] LI Shouju, LIU Yingxi, WU Yuliang, Tensile and shear theory of deforming process of blasting crater[J], Chinese Journal of Rock Mechanics and Engineering, 15, pp. 525-528, (1996)
  • [2] Analysis on breakage from blasting crater of column charge[J], Water Resources and Hydropower Engineering, 41, 11, pp. 48-51, (2010)
  • [3] JIN Xuhao, LU Wenbo, Discussion on blasting crater theory[J], Rock and Soil Mechanics, 23, Supp.1, pp. 205-208, (2002)
  • [4] YE T Q., Field experiment for blasting crater[J], Journal of China University of Mining and Technology, 18, 2, pp. 224-228, (2008)
  • [5] YE Tuqiang, Field experiment for blasting crater in Yunfu pyrites mine[J], Engineering Blasting, 1, pp. 5-8, (2014)
  • [6] ZHOU Chuanbo, FAN Xiaofeng, LI Zheng, Et al., Study of parameters of large diameter deep hole blasting based on blasting crater test[J], Mining and Metallurgical Engineering, 26, 2, pp. 9-13, (2006)
  • [7] LV X P, LV F P,, LI C, WANG H L., Experimental study on blasting funnel under cylindrical uncoupled charge[C], Proceedings of the 2nd International Conference on Environmental Prevention and Pollution Control Technologies(EPPCT2020), pp. 725-730, (2020)
  • [8] WANG Weiguo, CHEN Yumin, YANG Gui, Et al., Field tests and numerical simulations of blast-induced crater in wet sands[J], Chinese Journal of Rock Mechanics and Engineering, 35, 1, pp. 68-75, (2016)
  • [9] ZHANG Junbing, PAN Weidong, FU Hongxian, Experimental study on the explosion crater of ice-rich frozen soil along Qinghai—Tibet railway[J], Chinese Journal of Rock Mechanics and Engineering, 24, 6, pp. 1077-1081, (2005)
  • [10] YUE Songlin, FAN Pengxian, Et al., Modeling experiment methods for cratering effects of explosions in rocks and comparative analysis[J], Chinese Journal of Rock Mechanics and Engineering, 33, 9, pp. 1925-1931, (2014)