Electron beam welding of aluminium alloy aw2099

被引：0

作者：

Ján U. ^{[1
]}

Marônek M. ^{[1
]}

Bárta J. ^{[1
]}

Sahul M. ^{[2
]}

Jurina F. ^{[1
]}

Pašák M. ^{[2
]}

机构：

[1] 1Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava, Institute of Production Technologies, J. Bottu 25, Trnava

[2] Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava, Institute of Materials Science, J. Bottu 25, Trnava

来源：

Ján, Urminský (jan.urminsky@stuba.sk) | 1600年 / Trans Tech Publications Ltd卷 / 994期

关键词：

Aluminium lithium alloy; Electron beam welding; Structural analysis;

D O I：

10.4028/www.scientific.net/msf.994.28

中图分类号：

学科分类号：

摘要：

The paper deals with the analysis of mechanical properties of welded joints made of AW 2099 aluminium-lithium alloy by electron beam welding. The thickness of the experimental material was 3±0.2 mm. PZ EZ 30 STU electron beam welding machine was used for production of welds. Maximum accelerating voltage used within this study was 55 kV. Metallographic analysis, hardness measurement test and static tensile were carried out. The structure of the weld joint of aluminiumlithium alloy was investigated. Produced welded joints were characterized by the presence of following zones: Heat affected zone (HAZ), equiaxed non-dendritic zone (EQZ), columnar dendritic zone (CDZ) and equiaxed dendritic zone (EDZ). EQZ grains were formed due to heterogeneous nucleation on precipitates at the fusion boundary. EQZ is typical for joining of aluminium lithiumalloys. © 2020 Trans Tech Publications Ltd, Switzerland.

引用

页码：28 / 35

页数：7

共 50 条

[1] On the microstructure and mechanical properties of AW2099 aluminium lithium alloy joints produced with electron beam welding
Sahul, Miroslav
Sahul, Martin
Harsani, Marian
Domankova, Maria
MATERIALS LETTERS, 2020, 276
[2] Influence of electron beam technological movements on aluminium alloy aw2099 welded joints properties
Ján U.
Marônek M.
Bárta J.
Lopatková M.
Hrušecký R.
Ján, Urminský (jan.urminsky@stuba.sk), 1600, Trans Tech Publications Ltd (994): : 36 - 43
[3] The effect of electron beam oscillation on the porosity of third-generation AW2099 aluminium lithium alloy welded joints
Sahul, Miroslav
Sahul, Martin
Kritikos, Michaela
Vyskoc, Maros
MATERIALS LETTERS, 2023, 339
[4] Effect of Heat Input on the Microstructure and Mechanical Properties of Electron Beam-Welded AW2099 Aluminium-Lithium Alloy
Miroslav Sahul
Martin Sahul
Marta Orłowska
Peter Jurči
Mária Dománková
Marián Drienovský
Journal of Materials Engineering and Performance, 2024, 33 : 776 - 796
[5] Effect of Heat Input on the Microstructure and Mechanical Properties of Electron Beam-Welded AW2099 Aluminium-Lithium Alloy
Sahul, Miroslav
Sahul, Martin
Orlowska, Marta
Jurci, Peter
Domankova, Maria
Drienovsky, Marian
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (02) : 776 - 796
[6] ANALYSIS OF THE PROPERTIES OF AW2099 ALUMINIUM-LITHIUM ALLOY WELDED BY LASER BEAM WITH AW5087 ALUMINIUM-MAGNESIUM FILLER MATERIAL
Sahul, Miroslav
Sahul, Martin
Pasak, Matej
Maronek, Milan
ACTA POLYTECHNICA, 2019, 59 (06) : 580 - 586
[7] Welding characteristics of thin aluminium and aluminium alloy sheets by electron beam and resistances spot welding
Ohkubo, Michinori
Kitagawa, Yasutaka
Otani, Toshikatsu
Keikinzoku Yosetsu/Journal of Light Metal Welding and Construction, 1995, 33 (05):
[8] ELECTRON-BEAM WELDING OF AN ALUMINIUM COPPER MANGANESE ALLOY
BONDAREV, AA
AUTOMATIC WELDING USSR, 1974, 27 (02): : 23 - 26
[9] Bubble formation in aluminium alloy during electron beam welding
Fujii, H
Umakoshi, H
Aoki, Y
Nogi, K
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 155 (1-3) : 1252 - 1255
[10] Residual stresses induced by electron beam welding in a 6061 aluminium alloy
Bardel, D.
Nelias, D.
Robin, V.
Pirling, T.
Boulnat, X.
Perez, M.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 235 : 1 - 12

← 1 2 3 4 5 →