Power loss of series resonant three-phase dual active bridge converter

被引:0
|
作者
Wu J. [1 ]
Cheng Y. [1 ]
Yan X. [1 ]
Sun X. [1 ]
机构
[1] Key Lab of Power Electronics for Energy Conservation and Motor Drive of Hebei Province, School of Electrical Engineering, Yanshan University, Qinhuangdao
来源
关键词
DC-DC converters; Dual active bridge; Power loss; Resonant converters; Three phase;
D O I
10.19912/j.0254-0096.tynxb.2020-0345
中图分类号
学科分类号
摘要
In this paper, the series resonant three-phase dual active bridge DC-DC converter based on the Y-Δ connection of the transformer is studied. First, the operation principle is analyzed in detail, and the inductor current, output power, and soft switching conditions are derived. Secondly, the secondary circuit of the transformer is reflected to the primary side, which greatly simplifies the circuit model of the converter. On this basis, the circuit parameters selection and hardware design are carried out. Then, by analyzing the power losses of transformer, inductor and switches, the total power loss model of series resonant three-phase DAB converter is established. Finally, a 500 W experimental prototype is designed to verify the accuracy of theoretical analysis and power loss model. © 2022, Solar Energy Periodical Office Co., Ltd. All right reserved.
引用
收藏
页码:149 / 156
页数:7
相关论文
共 12 条
  • [1] SUN K, CHEN H, WU H F., A review of analysis method and control technology for isolated bidirectional DC-DC converter used in energy storage systems, Advanced technology of electrical engineering and energy, 38, 8, pp. 1-9, (2019)
  • [2] WU L, LIU Z G, HONG X., Comparison and analysis of power control characteristic for isolated bidirectional full-bridge DC-DC converter, Transactions of China Electrotechnical Society, 28, 10, pp. 179-187, (2013)
  • [3] BAARS N, EVERTS J, WIJNANDS K, Et al., Performance evaluation of a three-phase dual active bridge DC-DC converter with different transformer winding configurations, IEEE transactions on power electronics, 31, 10, pp. 6814-6823, (2016)
  • [4] CHEN B, LI L, ZHAO Z B., Calculation of high-power high-frequency transformer's copper loss and magnetic core loss in dual-active-bridge DC-DC converter, Transactions of China Electrotechnical Society, 32, 22, pp. 129-139, (2017)
  • [5] ZHOU Y, ZHANG J B, CHEN Q M., Modeling and application of core losses for power inductor in switching converter, Electric power automation equipment, 37, 11, pp. 132-137, (2017)
  • [6] KRISMER F, KOLAR J W., Accurate power loss model derivation of a high-current dual active bridge converter for an automotive application[J], IEEE transactions on industrial electronics, 57, 3, pp. 881-891, (2010)
  • [7] ZHANG K, SHAN Z, JATSKEVICH J., Large-and small- signal average value modeling of dual-active-bridge DC-DC converter considering power losses[J], IEEE transactions on power electronics, 32, 3, pp. 1964-1974, (2017)
  • [8] LI J, YUAN L Q, GU Q, Et al., An efficiency optimization method in dual active bridge DC-DC converter based on loss model, Transactions of China Electrotechnical Society, 32, 14, pp. 66-76, (2017)
  • [9] ALMARDY M S, BHAT A K S., Three-phase (LC)(L)-type series-resonant converter with capacitive output filter, IEEE transactions on power electronics, 26, 4, pp. 1172-1183, (2011)
  • [10] LI X D, BHAT A K S., Analysis and design of high-frequency isolated dual-bridge series resonant DC/DC converter, IEEE transactions on power electronics, 25, 4, pp. 850-862, (2010)