Virtual human posture generation technology for civil aviation aircraft maintenance

被引：0
|
作者：
Quo Q. [1 ]
Ma X. [1 ]
Fu Y. [1 ]
机构：
[1] College of Aeronautical Engineering, Civil Aviation University of China, Tianjin
来源：
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS | 2023年 / 29卷 / 11期
关键词：
aircraft maintenance; multi-objective optimization; posture generation; virtual human;
D O I：
10.13196/j.cims.2022.0245
中图分类号：
学科分类号：
摘要：
Aiming at the problems of low efficiency and low applicability of virtual human pose generation technology used in the current maintenance verification analysis of civil aviation maintenance, a method for generating virtual human poses based on multi-objective optimization algorithm was proposed. The skeleton model of the virtual human was established according to the Euler quaternion operation rules. Then the target position of the maintenance was determined through the given engine design layout. The constraint objective function of each machine factor was constructed by comprehensively considering the accessibility, balance, joint rotation range and field of view factors in maintenance. On this basis, the virtual human attitude was optimized by using particle swarm optimization algorithm, so as to realize the generation of maintenance work posture of the virtual human. The experimental results showed that the proposed method could realize the generation of the virtual human working posture when the target working point was known in the maintenance work, and had good effectiveness, applicability and feasibility. © 2023 CIMS. All rights reserved.
引用
收藏
页码：3582 / 3591
页数：9
相关论文
共 27 条
  • [1] ZHAO Fenglu, Analysis of safety trend in civil aviation of China and comparative study with other countries, (2018)
  • [2] GENG J., PENG X, LI Y, Et al., A semi-automatic approach to implement rapid non-immersive virtual maintenance simula-tion[j], Assembly Automation, 38, 3, pp. 291-302, (2018)
  • [3] LU Zhong, Research on key technologies of maintainability concurrent design for civil aircraft [D], (2009)
  • [4] BERNARD F, ZARE M, SAGOT J C, Et al., Using digital and physical simulation to focus on human factors and ergonomics in aviation maintainability[J], Human Factors, 62, 1, pp. 37-54, (2020)
  • [5] HAOJianping, WANG Songshan, LIU Hui, Methods and technologies for virtual prototype based maintainability engineering[M], (2016)
  • [6] JIAO Qinglong, XU Da, Research on the design method of virtual human body maintenance posture examples[J], Computer Simulation, 36, 4, pp. 324-329, (2019)
  • [7] KUO C F, WANG M J., Motion generation from MTM se-mantics[j], Computers in Industry, 60, 5, pp. 339-348, (2009)
  • [8] ZHANG D J, ZHANG G Y, LI L Q., Calibration of a six-axis parallel manipulator based on BP neural network[j], The Industrial Robot, 46, 5, pp. 692-698, (2019)
  • [9] LIPPI V., Prediction in the context of a human-inspired posture control model[J], Robotics and Autonomous Systems, 107, pp. 63-70, (2018)
  • [10] LI L, PRABHU S, XIE Z Y, Et al., Lifting posture prediction with generative models for improving occupational safety [J], IEEE Transactions on Human-Machine Systems, 51, 5, pp. 494-503, (2021)
123