Calibration and Verification of Bonding Parameters of Banana Straw Simulation Model Based on Discrete Element Method

被引：0

作者：

Zhang X. ^{[1
]}

Hu X. ^{[1
]}

Liu J. ^{[1
]}

Yang Y. ^{[1
]}

Li Y. ^{[1
]}

机构：

[1] School of Mechanical and Electrical Engineering, Hainan University, Haikou

来源：

Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2023年 / 54卷 / 05期

关键词：

banana straw; bond parameter calibration; discrete element method;

D O I：

10.6041/j.issn.1000-1298.2023.05.012

中图分类号：

学科分类号：

摘要：

In order to improve the accuracy and reliability of using the discrete element method to guide the design and optimization of banana straw crushing and returning equipment, Hertz-Mindlin with bonding contact model was used to establish the discrete element bonding model of banana straw and carry out parameter calibration. The impact recovery test, static friction test, and rolling friction test were carried out by high-speed photography technology, and the basic discrete element model contact parameters such as impact recovery coefficient, static friction factor, and rolling friction factor of banana straw were determined. Physical and simulated shear tests of banana straw were carried out to obtain the mechanical characteristic curve of destroying banana straw outer skin, and the maximum physical shear force was determined to be 122.41 N. The optimal parameter combinations of normal contact stiffness, tangential contact stiffness, critical normal stress, and critical tangential stress of the banana straw bonding model were determined by central composite design (CCD) response surface method. The simulation results showed that the relative error between the simulated shear force results and the physical shear force was only 2. 34%, which verified the reliability and accuracy of the bond parameter calibration method, and provided a theoretical reference for the design and research of the banana straw crushing and return machine. © 2023 Chinese Society of Agricultural Machinery. All rights reserved.

引用

页码：121 / 130

页数：9

共 33 条

[1] WANG Yongfen, YANG Baoming, HE Ping, Et al., Field evaluation and comprehensive ranking of 10 different eeotype banana varieties in the main producing areas of Yunnan [J], Chinese Journal of Tropical Agriculture, 42, 2, pp. 1-8, (2022)
[2] HU Congjiu, Analysis on the change and trend of banana market in the world[J], China Tropical Agriculture, 6, pp. 39-41, (2020)
[3] ZHU Zhengbo, YANG Zhou, SUN Jianfeng, Et al., Parameter optimization and experiment of pneumatic holding part for banana crown cutting, Transactions of the CSAE, 32, 4, pp. 33-39, (2016)
[4] GUO Jie, KARKEE M, YANG Zhou, Et al., Discrete element modeling and physical experiment research on the biomechanical properties of banana bunch stalk for postharvest machine development [J], Computers and Electronics in Agriculture, 188, (2021)
[5] SU Jilong, LIU Yuanli, WU Jindong, Research status and development trend of banana picking machine [J], Journal of China Agricultural University, 24, 7, pp. 131-137, (2019)
[6] LI Jiaqi, The study on world banana trade pattern and its influence on Chinese banana market[D], (2015)
[7] XU Xiaojun, LIU Enping, Banana market and industry survey and analysis report of China, Agricultural Products Market, 12, pp. 44-46, (2021)
[8] WANG Quanyong, OU Yanfang, Present situation and countermeasures of banana industry standardization in China [J], Standardization in China, 2021, 3, pp. 147-152
[9] LIAO Yitao, LIAO Qingxi, ZHOU Yu, Et al., Parameters calibration of discrete element model of fodder rape crop harvest in bolting stage[J], Transactions of the Chinese Society for Agricultural Machinery, 51, 6, pp. 73-82, (2020)
[10] SHENG Yue, TIAN Haiqing, WANG Di, Et al., Study on establishment of discrete element model of maize root system calibration of simulation parameters [J], Journal of Agricultural Mechanization Research, 45, 2, pp. 164-170, (2023)

← 1 2 3 4 →