Design and Experiment on Suction Nozzle Type Hole of Pneumatic-sheave Combined Vegetable Precision Metering Device

被引：0
|
作者：
Yin W. [1 ,2 ]
Zhao L. [1 ,2 ]
Li H. [1 ,2 ]
Hu F. [1 ,2 ]
Yu H. [1 ]
机构：
[1] College of Engineering, Nanjing Agricultural University, Nanjing
[2] Key Laboratory of Intelligent Agricultural Equipment in Jiangsu Province, Nanjing
来源：
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2019年 / 50卷 / 04期
关键词：
Experiment; Precision metering device; Suction nozzle type hole; Vegetable seed;
D O I：
10.6041/j.issn.1000-1298.2019.04.008
中图分类号：
学科分类号：
摘要：
Precise seeding technology has become an important direction of vegetable seeder development. Considering the characteristics of multi-varieties and large differences in vegetable seeds, the requirements for sowing are also different. According to the above practical problems, a pneumatic-sheave combined precision metering device was designed which owned advantages such as simple structure and suitable for various vegetable seeds. The precision metering device adopted a two-stage seeding mode. The small grooved wheel seeding device adopted for the first part, negative pressure to adsorb seeds and positive pressure to remove seeds were adopted for the second part. Three-dimensional laser scanning and three-dimensional point cloud calculation method were used to measure the three-axis size of pakchoi, radish and eggplant seeds. Based on these data, several shapes of suction nozzles such as through hole, conical hole, cylindrical hole and kidney ellipsoid hole were designed. The single-factor test was used to obtain the best chamber vacuum for seeder. By applying the single factor text for vacuum degree, optimal result showed that most suitable vacuum degrees for pakchoi, radish and eggplant were 4 kPa, 5 kPa and 3 kPa, respectively. The optimal metering tray speed and suction nozzle type hole were obtained by the complete combination test. The result showed that when the rotational speed of the metering tray was 17.5~22.5 r/min, the metering device qualified rate was high, especially at 20 r/min. The suction nozzle type holes suitable for pakchoi, radish and eggplant were conical holes, kidney ellipsoid hole and through hole, respectively. Under the optimal suction nozzle, vacuum and rotational speed conditions, the qualified rates of pakchoi, radish and eggplant were 97.0%, 95.4% and 93.7%, respectively, which could completely meet the requirement of seeding index. © 2019, Chinese Society of Agricultural Machinery. All right reserved.
引用
收藏
页码：68 / 76and136
相关论文
共 25 条
  • [1] Zhang N., Liao Q., Research progress of seeding technology and equipment for small seeds in China, Chinese Agricultural Mechanization, 33, 1, (2012)
  • [2] Wang L., Liao Y.T., Liao Q.X., Design and experiment of remote control precision planter for Chinese cabbage vegetable, International Journal of Robotics & Automation, 33, 2, pp. 208-214, (2018)
  • [3] Yazgi A., Degirmencioglu A., Optimisation of the seed spacing uniformity performance of a vacuum-type precision seeder using response surface methodology, Biosystems Engineering, 97, 3, pp. 347-356, (2007)
  • [4] Yang L., Shi S., Cui T., Et al., Air-suction corn precision metering device with mechanical supporting plate to assist carrying seed, Transactions of the Chinese Society for Agricultural Machinery, 43, pp. 48-53, (2012)
  • [5] Jia H., Chen Y., Zhao J., Et al., Design and experiment of pneumatic-mechanical combined precision metering device for soybean, Transactions of the Chinese Society for Agricultural Machinery, 49, 4, (2018)
  • [6] Li N., Zhao M., Liu F., Et al., Experimental study on the performance of pneumatic precision metering device for millet seeds, Journal of China Agricultural University, 21, 5, pp. 122-128, (2016)
  • [7] Liao Q., Yang B., Li X., Et al., Simulation and experiment of inside-filling air-blow precision metering device for rapeseed, Transactions of the Chinese Society for Agricultural Machinery, 43, 4, pp. 51-54, (2012)
  • [8] Guarella P., Pellerano A., Pascuzzi S., Experimental and theoretical performance of a vacuum seeder nozzle for vegetable seeds, Journal of Agricultural Engineering Research, 64, 1, pp. 29-36, (1996)
  • [9] Liao Q., Li J., Qin G., Experiment of pneumatic precision metering device for rapeseed, Transactions of the Chinese Society for Agricultural Machinery, 40, 8, pp. 44-48, (2009)
  • [10] Xia H., Li Z., Zhen W., Design and experiment of the vegetable seed metering device in pneumatic plate-type, Transactions of the Chinese Society for Agricultural Machinery, 41, 6, pp. 56-60, (2010)
123