Detection Method for Chamber of Large-caliber Artillery Barrel Based on Electromagnetic Ultrasonic Surface SH-wave

被引：0
|
作者：
Zhang J. [1 ]
Wang X. [1 ]
Shi W. [2 ]
Dong Z. [1 ]
Deng H. [1 ]
机构：
[1] PLA Army Academy of Artillery and Air Defense Academy, Hefei
[2] Key Laboratory of Nondestructive Testing of Ministry of Education, Nanchang Hangkong University, Nanchang
来源：
Binggong Xuebao/Acta Armamentarii | 2021年 / 42卷 / 08期
关键词：
Artillery; Barrel; Cross crack; Electromagnetic acoustic transducer; Radiated sound field; Surface shear-horizontal wave;
D O I：
10.3969/j.issn.1000-1093.2021.08.021
中图分类号：
学科分类号：
摘要：
The inner bore surface of a large-caliber artillery barrel with drug chamber must be subjected to high temperature and pressure during the launching process. This may produce multi-network cracks and pose a hidden danger to safety and performance. The challenge remains that the traditional detection methods have higher requirements for inner wall cleanliness while the detection period takes a long time. A detection method based on electromagnetic acoustic transducer surface shear-horizontal(SH) wave is proposed to detect the cracks on the inner bore surface of a gun barrel with chamber. Quantitative detection is also carried out in assessing defects. This process includes establishing a finite element model relating to the radiated sound field of surface SH wave on permanent periodic magnet electromagnetic acoustic transducer(EMAT). The influences of length and pair number of permanent magnet on the radiated sound field are analyzed, and the design parameters of EMAT are optimized. In studying the characteristics of surface SH wave sound fields, a finite element model of the surface SH wave propagation in a gun barrel with the chamber with cross cracks was also established. The law of interaction relating to the surface SH wave and crack defects with different angles were verified through both study and experiment. The results illustrate that the electromagnetic acoustic transducer composed of 12 pairs of permanent magnets with length of 20 mm could be used to detect the cross cracks with 10 mm×1 mm×2 mm, and analyze the influence law of crack angle and echo amplitude. © 2021, Editorial Board of Acta Armamentarii. All right reserved.
引用
收藏
页码：1763 / 1770
页数：7
相关论文
共 23 条
  • [1] LI Z M, HE C F, LIU Z H, Et al., Research progress and prospects of circumferential guided waves inspection technique in pipes, Journal of Beijing University of Technology, 44, 5, pp. 641-657, (2018)
  • [2] WEI H Z, GAO S Z, LI D Y., Applied research on the life prolonged and restored materials in gun tube weapon, Acta Armamentarii, 38, 3, pp. 440-446, (2017)
  • [3] GAO W, ZHANG J, WANG J J., Study on non-destructive detection methods of gun barrels, Fire Control & Command Control, 40, 7, pp. 16-19, (2015)
  • [4] LU C, MEN P, LI L., An experimental study of EMAT ultrasonic surface waves modes in railhead, International Journal of Applied Electromagnetics and Mechanics, 33, 3, pp. 1127-1133, (2010)
  • [5] LOVE A E H., Some problems of geodynamics, (1911)
  • [6] HIRAO M, OGI H., An SH-wave EMAT technique for gas pipeline inspection, NDT & E International, 32, 3, pp. 127-132, (1999)
  • [7] WEI Z, ZHOU X J, CHENG Y D., Surface wave acoustoelasticity of aerospace transparency, Applied Acoustics, 19, 3, pp. 35-38, (2000)
  • [8] LIU H, WANG T J, WANG Z K, Effect of initial stress on surface acoustic wave propagation in piezoelectric layered structures, Acta Mechanica Sinica, 32, 4, pp. 491-496, (2000)
  • [9] LIU H, WANG Z K, WANG T J., Effect of initial stress on the propagation behavior of Love waves in a layered piezoelectric structure, International Journal of Solids and Structures, 38, 1, pp. 37-51, (2001)
  • [10] WANG X, SHEN Y P., The general solution of three-dimensional problems in magnetoelectroelastic media, International Journal of Engineering Science, 40, 10, pp. 1069-1080, (2002)
123