Effect of ultra-thin prepreg on conductive properties of carbon fiber/epoxy composites

被引：0
|
作者：
Li S. [1 ]
Zhang Z. [1 ]
Ba W. [1 ]
Wu H. [1 ]
机构：
[1] College of Mechanical Engineering, Henan University of Technology, Zhengzhou
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2020年 / 37卷 / 03期
关键词：
Carbon fiber; Composites; Electrical conductivity; Scale effect; Ultrathin prepreg;
D O I：
10.13801/j.cnki.fhclxb.20190527.002
中图分类号：
学科分类号：
摘要：
In order to improve the electrical and mechanical properties of carbon fiber/epoxy (CF/EP) composite, the 12K CF was prepared into CF/EP prepreg using the integrated process of carbon fiber spreading and infiltration. The thickness of CF/EP prepreg was 0.02 mm, 0.03 mm, 0.08 mm and 0.10 mm, respectively. Then CF/EP composite unidirectional laminate was fabricated by the molding process. The influence of the microstructure structure on the resistivity of CF/EP composite laminate, the resistivity of the CF/EP composite laminate as a function of temperature and the response of the laminate resistivity under tensile load were analyzed and tested. The results show that the proportion of the resin-rich pocket with larger area in the CF/EP composite unidirectional laminate is reduced as the prepreg thickness is reduced from 0.10 mm to 0.02 mm, and the resistivity of the CF/EP composite along the thickness direction decreases from 151.3 Ω•cm to 32.1 Ω•cm. This improves the electrical conductivity of CF/EP composite by about 5 times. As the temperature increases, the resistivity of the CF/EP composite laminate decreases gradually, and the rate of resistivity declination of the thick prepreg laminate in the thickness direction is larger than that of the thin prepreg laminate. The resistivity of the CF/EP composite laminate made of thin prepreg under loading has high stability, indicating that the thin layer of prepreg helps to improve the electrical properties of CF/EP composite and the ability of load bearing, thus obtaining higher mechanical properties and electrical properties. The experimental results provide the basis for the structure-functional integration design of the CF/EP composite. © 2020, Editorial Office of Acta Materiae Compositae Sinica. All right reserved.
引用
收藏
页码：539 / 545
页数：6
相关论文
共 26 条
  • [1] Zhang X.H., Meng Y., Zhang W., The development status and trend of carbon fiber reinforced composite materials technology, Fiber Composite Materials, 21, 1, (2004)
  • [2] Lv G.H., Li X.T., Liu B.Z., Et al., Influence of preparation process of CF/ABS resin composites on conductivity and theoretical prediction of shielding properties, Acta Materiae Compositae Sinica, 13, 2, pp. 1-8, (1996)
  • [3] Fan W., Zhang C., Liu T.X., Research progress of graphene/polymer composites, Acta Materiae Compositae Sinica, 30, 1, pp. 14-21, (2013)
  • [4] Li W., Guo Q.F., Application of carbon fiber composites to cosmonautic fields, Chinese Journal of Optics, 4, 3, pp. 201-212, (2011)
  • [5] Li W., Lin Y.G., Lu X., Et al., Influence of carbon nanotubes on conductivity of carbon fiber composites, Hi-Tech Fiber & Application, 39, 6, pp. 45-50, (2014)
  • [6] Chen Y.T., Zhou M.Y., Wang G.Q., Et al., Study on conductivity and shielding properties of carbon fiber/polymer composites, Plastics Science and Technology, 6, pp. 4-7, (1997)
  • [7] Sun J.R., Yao X.L., Xu W.J., Et al., Dynamic characteristics of carbon fiber composites under nondestructive lightning current A component, Journal of Xi'an Jiaotong University, 50, 6, pp. 130-135, (2016)
  • [8] Jiang K.Y., Zhang W.D., Qiu H., Et al., Research progress of anti-lightning composite materials for aircraft, Adhesion, 11, pp. 60-63, (2017)
  • [9] Bekyarova E., Thostenson E., Yu A., Et al., Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites, Langmuir, 23, 7, pp. 3970-3974, (2007)
  • [10] Qin W.Z., Vautard F., Drzal L.T., Et al., Mechanical and electrical properties of carbon fiber composites with incorporation of graphene nanoplatelets at the fiber-matrix interphase, Composites Part B: Engineering, 69, pp. 335-341, (2015)
123