Effects of gain distribution on self-similar amplification of picosecond pulses

被引:0
|
作者
Zhang Y. [1 ]
Liu B. [1 ]
Song H. [1 ]
Li Y. [1 ]
Chai L. [1 ]
Hu M. [1 ]
机构
[1] Ultrafast Laser Laboratory, College of Precision Instruments and Opto-Electronics Engineering, Tianjin University, Tianjin
关键词
Fiber amplifier; Gain distribution; Picosecond laser; Self-similar amplification;
D O I
10.3788/IRLA20190565
中图分类号
学科分类号
摘要
The effects of gain distribution on self-similar amplification of picosecond pulses in a Yb-doped fiber laser system were studied by numerical simulation. Ultrashort laser pulses amplified in self-similar amplification theoretical model was established to analyze the impact of pump configuration, fiber length and total gain coefficient on the self-similar amplification evolution and laser output performance. Detailed numerical simulation reveals that the best self-similar amplification result can be found for different cases, where high-quality self-similar pulses with ~100 fs transform-limited pulse duration are obtained. It is demonstrated that the self-similar evolution speed in a forward-pumping scheme is faster than that in a backward-pumping scheme for a fixed seed pulse. Furthermore, the results indicate that for the self-similar amplifier with different fiber lengths and gain coefficients, the forward-pumping scheme shows better evolution results in lower seed energy and longer wavelength range, while the backward-pumping scheme is more suitable for the higher seed energy and shorter wavelength range. Copyright ©2021 Infrared and Laser Engineering. All rights reserved.
引用
收藏
相关论文
共 21 条
  • [1] Yan Dongyu, Liu Bowen, Song Huanyu, Et al., Research status and development trend of high power femtosecond fiber laser amplifiers, Chinese Journal of Lasers, 46, 5, (2019)
  • [2] Li Chen, Razvan Stoian, Cheng Guanghua, Laser-induced periodic surface structures with ultrashort laser pulse, Chinese Optics, 11, 1, pp. 1-17, (2018)
  • [3] Wang Zhen, Fu Wenjing, Zhang Rongzhu, Numerical simulation of femtosecond laser multi-pulse ablation of metal iron, Infrared and Laser Engineering, 48, 7, (2019)
  • [4] Ma Yuping, Zhang Yao, Wei Chao, Et al., Surface polishing of CVD diamond coating by femtosecond laser, Optics and Precision Engineering, 27, 1, pp. 164-171, (2019)
  • [5] Zheng Changbin, Shao Junfeng, Li Xuelei, Et al., Femtosecond pulsed laser induced damage characteristics on Si-based multi-layer film, Chinese Optics, 12, 2, pp. 371-381, (2018)
  • [6] Lu X, Zhang S, Jeon C G, Et al., Time-of-flight detection of femtosecond laser pulses for precise measurement of large microelectronic step height, Optics Letters, 43, 7, pp. 1447-1450, (2018)
  • [7] Pan Deng, Li Jiawen, Yang Liang, Et al., Femtosecond laser holograpic fabrication of hydrogel cell scaffold, Optics and Precision Engineering, 25, 9, pp. 2277-2282, (2017)
  • [8] Sun Shufeng, Wang Pingping, Micro/nano structures fabricated by two-photon photopolymerization of femtosecond laser, Infrared and Laser Engineering, 47, 12, (2018)
  • [9] Matsui Y, Pelusi M D, Suzuki A., Generation of 20-fs optical pulses from a gain-switched laser diode by a four-stage soliton compression technique, IEEE Photonics Technology Letters, 11, 10, pp. 1217-1219, (1999)
  • [10] Ouzounov D G, Ahmad F R, Muller D, Et al., Generation of megawatt optical solitons in hollow-core photonic band-gap fibers, Science, 301, 5640, pp. 1702-1704, (2003)