A novel fault location method employing node voltage difference value for a distribution network

被引：0
|
作者：
Xie L. [1 ]
Li Y. [1 ]
Luo L. [1 ]
Zeng X. [2 ]
Yu K. [2 ]
Hou L. [3 ]
Cao Y. [1 ]
机构：
[1] School of Electrical and Information Engineering, Hunan University, Changsha
[2] School of Electrical and Information Engineering, Changsha University of Science and Technology, Changsha
[3] CYG SUNRI Co., Ltd., Shenzhen
来源：
Dianli Xitong Baohu yu Kongzhi/Power System Protection and Control | 2023年 / 51卷 / 06期
基金：
中国国家自然科学基金;
关键词：
distribution network; fault location; node voltage difference value; μPMU;
D O I：
10.19783/j.cnki.pspc.220883
中图分类号：
学科分类号：
摘要：
To solve the economic shortcomings of and improve the location accuracy of fault location methods employing micro-phasor measurement unit (μPMU), a novel fault location method based on node voltage difference value is proposed. By analyzing the fault characteristics of node voltages for the distribution network, an indicator W is defined as the difference value between the calculated values and measured values of node voltage. Then, according to the numerical relationship between the calculated voltage values and the measured voltage values, a fault branch identification principle is established with limited measurement devices for the distribution network. From the measurement data at the terminals of fault branches and the numerical relationship between the change value of line node voltage and the change value of node measured voltage, a fault location method is proposed based on node voltage difference value. Simulation results show that the proposed method can locate fault points effectively. It has low sensitivity to fault types, grounding resistances and measurement errors, and good robustness to the changes of line parameters and node load. © 2023 Power System Protection and Control Press. All rights reserved.
引用
收藏
页码：106 / 116
页数：10
相关论文
共 28 条
  • [1] LI Lianbing, SUN Tengda, ZENG Siming, Et al., Fault location method for distribution networks based on traveling wave time difference, Power System Protection and Control, 50, 3, pp. 140-147, (2022)
  • [2] LI Z, WAN J, WANG P, Et al., A novel fault section locating method based on distance matching degree in distribution network, Protection and Control of Modern Power Systems, 6, 2, pp. 253-263, (2021)
  • [3] YI Zhonglin, JU Hanji, WANG Jie, Et al., Fault location system configuration and location method of charging pile based on binary particle swarm optimization, Electrical Measurement & Instrumentation, 58, 2, pp. 139-145, (2021)
  • [4] ZHANG Yunhao, ZHANG Shu, ZHANG Wenhai, Et al., Fault section location of a distribution network based on voltage variation of the secondary side of a transformer in the station area, Power System Protection and Control, 50, 16, pp. 23-32, (2022)
  • [5] XIE Liwei, LI Yong, LUO Longfu, Et al., Fault location method for distribution networks based on distance matrix and branch coefficient, Proceedings of the CSEE, 40, 7, pp. 2180-2191, (2020)
  • [6] JAMALI S, BAHMANYAR A, RANJBAR S., Hybrid classifier for fault location in active distribution networks, Protection and Control of Modern Power Systems, 5, 2, pp. 174-182, (2020)
  • [7] LIANG Rui, JIN Zheng, WANG Chonglin, Et al., Research of fault location in distribution networks based on integration of travelling wave time and frequency analysis, Proceedings of the CSEE, 33, 28, pp. 130-136, (2013)
  • [8] LIU Xiaoqing, WANG Dazhi, JIANG Xuechen, Et al., Fault location algorithm for distribution power network based on relationship in time difference of arrival of traveling wave, Proceedings of the CSEE, 37, 14, pp. 4109-4115, (2017)
  • [9] DENG Feng, MEI Longjun, TANG Xin, Et al., Fault line selection method of distribution network based on time-frequency traveling wave panoramic waveform, Transactions of China Electrotechnical Society, 36, 13, pp. 2861-2870, (2021)
  • [10] SALIM R H, DE OLIVEIRA K R C, FILOMENA A D, Et al., Hybrid fault diagnosis scheme implementation for power distribution systems automation, IEEE Transactions on Power Delivery, 23, 4, pp. 1846-1856, (2008)
123