Parameter Optimization and Experiment of Air-screen Potato-stone Cleaning Device Based on Gas-Solid Coupling

被引：0

作者：

Li X. ^{[1
]}

Wei Z. ^{[1
,2
]}

Su G. ^{[3
,4
]}

Wang X. ^{[1
]}

Zhang X. ^{[1
]}

Wang X. ^{[1
]}

Cheng X. ^{[1
]}

Jin C. ^{[1
,2
]}

机构：

[1] School of Agricultural Engineering and Food Science, Shandong University of Technology, Zibo

[2] Nanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture and Rural Affairs, Nanjing

[3] Shandong Star Agricultural Equipment Co., Ltd., Dezhou

[4] Shandong Provincial Intelligent Engineering and Technology Research Center for Potato Production Equipment, Dezhou

来源：

Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2024年 / 55卷 / 01期

基金：

中国国家自然科学基金; 中国博士后科学基金;

关键词：

gas - solid coupling; potato; cleaning and separating device; separation of potatoes and stones;

D O I：

10.6041/j.issn.1000-1298.2024.01.009

中图分类号：

学科分类号：

摘要：

At present, the rate of potato skin breaking after harvest was high and the content of impurities was high in China. In order to solve the problem that the rate of potato skin breaking was high, the content of impurities was high and the high cost of the above two points after the potato harvest, an airscreen type potato cleaning device was designed and optimized. By using the method of EDEM — Fluent coupling simulation, the air velocity at the inlet of the cleaning device, the swinging form of the shaking screen, the swinging frequency and the inclined angle were taken as the experimental factors, and the cleaning and separating rate and the cleanliness rate of the potatoes were taken as the evaluation indexes. Multiple sets of simulation analyses were conducted on the cleaning process, and validation and optimization were conducted on the basis of the simulation results. The simulation results showed that the wind speed at the inlet of the cleaning device played a decisive role in the feasibility of potato pneumatic separation. The order of significance of the impact was as following： the air velocity at the inlet of the cleaning device, the inclined angle of the shaking screen and the shaking frequency of the shaking screen, and the simple harmonic oscillation of the shaking screen was better than the up-down oscillation. The optimal working parameter combination was that the form of the simple harmonic swing of the screen was front and back, the angle of the screen was 250, the swing frequency was 10 Hz, the wind speed of the fan was 60 m/s. Under the optimal working parameter combination, the potato cleaning and separating rate was 93.1% and the cleanliness rate was 98.7%. The results showed that the application of EDEM — Fluent coupling simulation was helpful to the research of potato cleaning and separating, and the research results could provide a theoretical basis for the design and optimization of potato cleaning device. At the same time, it laid a foundation for the further research on the size and shape of the opening of the shaking sieve. There was little difference between the bench verification experiment and the simulation experiment. The results of the bench verification test and the simulation test were basically the same, which laid a foundation for the follow-up field test. © 2024 Chinese Society of Agricultural Machinery. All rights reserved.

引用

页码：96 / 108

页数：12

共 39 条

[1] CHANDRASEKARA A, JOSHEPH K T., Roots and tuber crops as functional foods: a review on phytochemical constituents and their potential health benefits[J], International Journal of Food Science, 25, 1, pp. 1-15, (2016)
[2] KANG W, FAN M, MA Z, Et al., Luxury absorption of potassium by potato plants, American Journal of Potato Research, 91, 5, pp. 573-578, (2014)
[3] LU Jinqing, YANG Xiaohan, LU Yining, Et al., Analysis and experiment of potato damage in process of lifting and separating potato excavator, Transactions of the Chinese Society for Agricultural Machinery, 51, 1, pp. 103-113, (2020)
[4] KHATER, Effect of some forward speeds of mechanical harvesting on potato damage in south eastern qantara (Egypt), Journal of Agriculture and Environment for International Development, 102, 4, pp. 357-368, (2008)
[5] KHEIRALIPOUR K, KHAZAEE Y, HOSAINPOUR A, Et al., Development of an algorithm based on image processing technique and sport vector machine to distinct potato from clod and stone [J], Journal of Researches in Mechanics of Agricultural Machinery, 8, 1, pp. 1-11, (2019)
[6] WANG Xiangyou, SUN Jingbin, XU Yingchao, Et al., Design and experiment of potato cleaning and sorting machine, Transactions of the Chinese Society for Agricultural Machinery, 48, 10, pp. 316-322, (2017)
[7] ELGENDY SLA, MORAD M M, ELSHAL H M., Comparative study between some different potato harvesting machines in smallholdings[J], Zagazig Journal of Agricultural Research, 12, 4, pp. 148-153, (2015)
[8] LU Jinqing, WANG Pengrong, LIU Zhifeng, Et al., Design and experiment of potato harvester stem separation equipment, Transactions of the Chinese Society for Agricultural Machinery, 50, 6, (2019)
[9] WANGDi LIANWenxiang, Et al., Development of4UF^ —1400 type potato combine harvester^ J], Transactions of the CSAE, 29, 1, pp. 11-17, (2013)
[10] ZAHARAN H, OLANIYI A F, UMEZURUIKE L, Harvest and postharvest factors affecting bruise damage of fresh fruits, Horticultural Plant Journal, 6, 1, pp. 6-18, (2020)

← 1 2 3 4 →