Design and development of a smart substation SV packet analysis tool based on Wireshark

被引：0
|
作者：
Luan Q. [1 ]
Yue W. [1 ]
Zhou Y. [1 ]
机构：
[1] NARI Technology Development Co., Ltd. Shenzhen Branch, Shenzhen
来源：
Dianli Xitong Baohu yu Kongzhi/Power System Protection and Control | 2019年 / 47卷 / 24期
关键词：
Open source software; Protocol dissector; Smart substation; SV abnormal judgment; SV packet; SV wave; Wireshark;
D O I：
10.19783/j.cnki.pspc.190041
中图分类号：
学科分类号：
摘要：
Wireshark is an open source, free, powerful and extensible network communication packet capture analysis software, but it has many shortcomings in analyzing SV packets, which limits the use of Wireshark in smart substation. By analyzing the design idea, module architecture, main data structure and processing flow, and the frame structure and coding of SV packet, the design idea and implementation process of Wireshark-based SV packet analysis tool are presented. The operation result of the SV packet analysis tool designed and developed based on this scheme has achieved the intended purpose. The further development based on the open source software Wireshark expands the application scope of Wireshark, and can absorb the essence of open source software. It provides an idea for the application of open source software in power systems and has great significance for understanding the smart substation communication protocol. © 2019, Power System Protection and Control Press. All right reserved.
引用
收藏
页码：169 / 177
页数：8
相关论文
共 22 条
  • [1] Gao Z., Huang H., Xu H., Et al., Discussion on applications of IEC 61850 and its development, Power System Protection and Control, 46, 1, pp. 162-169, (2018)
  • [2] State Electricity Regulatory Commission of People's Republic of China, Technical guide for smart substation: GB/T 30155-2013, (2013)
  • [3] Wang H., Zhang Y., Cai Z., Et al., Information flow calculation model and method for process bus network in smart substation, Power System Technology, 37, 9, pp. 2602-2607, (2013)
  • [4] Yu Y., Zhou C., Zhan R., Et al., Research on network stress causes and test method of relay protection in smart substation, Power System Protection and Control, 45, 18, pp. 156-162, (2017)
  • [5] Xu C., Zhang Y., Ge Y., Analysis and study on intelligent substation process level network data Stream, Electric Power, 46, 8, pp. 153-159, (2013)
  • [6] Tao W., Gao H., Yang G., Et al., Research on redundant networking mode and network delay accumulation technology of smart substation process layer, Power System Protection and Control, 46, 8, pp. 124-129, (2018)
  • [7] Li X., Ni C., Li B., Et al., Optimal design of process level device delay based on self-adaption sampling algorithm and data processing, Power System Protection and Control, 46, 18, pp. 164-170, (2018)
  • [8] Cheng J., Wu Z., Application of Wireshark in substation defect treatment, Telecommunications for Electric Power System, 34, 2, pp. 97-100, (2013)
  • [9] Hu Y., Zhang H., Substation configuration and graphic technology based on GOOSE message, Journal of Nanjing Institute of Technology (Natural Science Edition), 14, 4, pp. 85-90, (2016)
  • [10] Huang Z., Li Y., Li T., Et al., Design and implementation of automatic generation technology of SCD file virtual circuit in smart substation, Power System Protection and Control, 45, 17, pp. 106-111, (2017)
123