Handling Improvement for Distributed Drive Electric Bus Based on Torque Vectoring Control Method

被引：0
|
作者：
Su L. [1 ,2 ]
Leng B. [3 ]
Jin D. [3 ]
机构：
[1] School of Mechanical Engineering, Beijing Institute of Technology, Beijing
[2] Xiamen King Long United Automotive Industry Co., Ltd., Xiamen
[3] School of Automotive Studies, Tongji University, Shanghai
来源：
Tongji Daxue Xuebao/Journal of Tongji University | 2020年 / 48卷 / 11期
关键词：
Direct yaw moment control; Distributed drive electric bus; Handling performance; Torque vectoring control;
D O I：
10.11908/j.issn.0253-374x.20191
中图分类号：
学科分类号：
摘要：
Based on the distributed electric drive system, a handling improvement method was designed for a distributed drive electric coach using torque vectoring control. In view of the large load transfer, the strong coupling characteristics of tire, the suspension, and the steering system during coach corning, the relationship among equivalent lateral force, aligning torque, and the tire sideslip angle were described respectively by using polynomials. A mass estimation algorithm was designed to modify the lateral stiffness when the vertical load of the wheel changed. The vehicle reference steering characteristics was defined considering vehicle nonlinear characteristics, and the feedforward term of torque vectoring control at different steering angles and speeds was designed. In order to improve the robustness of the controller, an anti-integral saturation sliding mode variable structure control law was used as the feedback item of the torque vectoring control. The simulation and experiment results show that by using the proposed controller the vehicle steering characteristic is closer to neutral steering, and the mean value of peak steering angle in slalom test is reduced by more than 21%, which means the handling performance is significantly improved. © 2020, Editorial Department of Journal of Tongji University. All right reserved.
引用
收藏
页码：1629 / 1637
页数：8
相关论文
共 17 条
  • [1] XIONG Lu, LI Yue, LENG Bo, Handling and stability control of distributed drive electric vehicle based on motion tracking, Journal of Tongji University (Natural Science), 45, S1, (2017)
  • [2] AMIN T, MEHDI M, BEHROUZ N., Applied nonlinear control of vehicle stability with control and state constraints, Proceedings of the Institution of Mechanical Engineers, Part D, 234, 1, (2020)
  • [3] GOGGIA T, SORNIOTTI A, DENOVELLIS L, Et al., Integral sliding mode for the torque-vectoring control of fully electric vehicles: Theoretical design and experimental assessment, IEEE Transactions on Vehicular Technology, 64, 5, (2015)
  • [4] CAO Y, ZHAI L, SUN T, Et al., Straight running stability control based on optimal torque distribution for a four in-wheel motor drive electric vehicle, Energy Procedia, 105, (2017)
  • [5] MAEDA K, FUJIMOTO H, HORI Y., Four-wheel driving-force distribution method based on driving stiffness and slip ratio estimation for electric vehicle with in-wheel motors, 2012 IEEE Vehicle Power and Propulsion Conference (VPPC 2012), pp. 9-12, (2012)
  • [6] YU Z, LENG B, XIONG L, Et al., Direct yaw moment control for distributed drive electric vehicle handling performance improvement, Chinese Journal of Mechanical Engineering, 29, 3, (2016)
  • [7] BAI F, GUO K, ZHANG B, Et al., Analysis of tire cornering stiffness property under slight driving or braking condition, Applied Mechanics and Materials, 271, 272, (2013)
  • [8] POHL A, STEINDL R, REINDL L., The Intelligent tire utilizing passive SAW sensors-Measurement of tire friction, IEEE Transactions on Instrumentation and Measurement, 48, 6, (1999)
  • [9] GURKAN E, LEE A, RAJESH R., Estimation of tire-road friction coefficient using a novel wireless piezoelectric tire sensor, IEEE Sensors Journal, 11, 2, (2011)
  • [10] WANG R, WANG J., Tire-road friction coefficient and tire cornering stiffness estimation based on longitudinal tire force difference generation, Control Engineering Practice, 21, 1, (2013)
12