Aperture Measurement Method Based on Conic Invariant

被引：0

作者：

Zhang L. ^{[1
,2
]}

Li J. ^{[1
]}

Kou Y. ^{[3
]}

Miao J. ^{[3
]}

Hou Y. ^{[2
]}

机构：

[1] College of Mechanical and Electrical Engineering, Changchun University of Science and Technology, Jilin

[2] College of Mechanical and Vehicle Engineering, Changchun University, Jilin

[3] College of Mechanical and Aerospace Engineering, Jilin University, Jilin

来源：

Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science) | 2021年 / 49卷 / 05期

关键词：

Aperture measurement; Conic invariant; Coordinate transformation; Geometric fitting;

D O I：

10.12141/j.issn.1000-565X.200550

中图分类号：

学科分类号：

摘要：

A model of aperture measurement based on quadratic curve invariants was proposed to deal with the low detection efficiency and the problem that detection accuracy was greatly affected by the environment. The conic invariant aperture of the hole was obtained by ellipse geometry fitting on the surface of the hole. Firstly, the world coordinate system was established and the transformation relationship between the world coordinate system and the camera coordinate system was determined by calibration. The improved candy algorithm was used to extract the sub-pixel coordinates of the hole edge, and the sub-pixel coordinates of the hole edge were projected onto the hole surface according to the coordinate transformation relationship. Then, the ellipse geometric fitting of the hole edge curve on the hole surface was performed to obtain the quadratic curve invariant. Finally, the conic invariant was used to measure the aperture on the test bench, and the results were compared with those of the inner micrometer to verify the accuracy of the conic invariant model. © 2021, Editorial Department, Journal of South China University of Technology. All right reserved.

引用

页码：129 / 134

页数：5

共 16 条

[1] LI Q, REN S., A real-time visual inspection system for discrete surface defects of rail heads, IEEE Tran-sactions on Instrumentation and Measurement, 61, 8, pp. 2189-2199, (2012)
[2] SONG Z., Recent progresses on real-time 3D shape measurement using digital fringe projection techniques, Optics and Lasers in Engineering, 48, 2, pp. 149-158, (2010)
[3] WANG Jiagui, LI Linfeng, Aperture measurement which based on Michelson interference principle and design of device, Tool Technology, 47, 4, pp. 58-60, (2013)
[4] CUI J, FENG K, HU Y, Et al., A twin fiber bragg grating probe for the dimensional measurement of microholes, IEEE Photonics Technology Letters, 26, 17, pp. 1778-1781, (2014)
[5] TANG Ruiyin, WANG Quan, HE Hongkun, Et al., Aperture measurement based on wavelet transform and mathematical morphology, Applied Optics, 38, 4, pp. 622-626, (2017)
[6] TIAN Jin, JIANG Qiangrong, XU Manling, 3D object recognition based on multi view invariant, Journal of Beijing Polytechnic University, 26, 1, pp. 98-101, (2000)
[7] WEISS I., Geometric invariants and object recognition, International Journal of Computer Vision, 10, 3, pp. 207-231, (1993)
[8] ZHANG Z Y., A flexible new technique for camera calibration, IEEE Transactions on Pattern Analysis and Machine Intelligence, 22, 11, pp. 1330-1334, (2000)
[9] SHU Qilin, SHA Bo, Sub-pixel localization algorithm based on modified canny operator, Machinery Design Manufacture, 10, pp. 165-168, (2018)
[10] YU J Q, KULKARNI S R, POOL H V., Fitting of ellipses and spheroids, Proceedings of 2009 Conference Record of the Forty-Third Asilomar Conference on Signals, Systems and Computers, pp. 94-98, (2009)

← 1 2 →