Research on Displacement Mode and Path Tracking Method of Square Combined Deployable Mechanism

被引：0
|
作者：
Li J. [1 ]
Wang S. [1 ]
Peng Q. [1 ]
Li F. [1 ]
机构：
[1] School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an
来源：
Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University | 2019年 / 37卷 / 06期
关键词：
Balance matrix; Bifurcation; Displacement mode; Kinematics; Mobility; Path tracking; Screw theory; Singular value decomposition; Square combined deployable mechanism;
D O I：
10.1051/jnwpu/20193761200
中图分类号：
学科分类号：
摘要：
The motion path of the developable mechanism can not only grasp whether the mechanism can move according to the expected law, but also provide theoretical support for motion control. In order to accurately study the kinematics of the square combined mechanism, the mobility of the square combined expandable mechanism is analyzed based on the screw theory and the graph theory. Then, the balance matrix of the square combined expandable mechanism is derived,and the displacement mode of the square combined expandable mechanism is obtained through singular value decomposition. Secondly, the path tracking method of the square combined expandable mechanism is established by the iteration of the displacement mode. Finally, by means of the example analysis, the position of the bifurcation point of the square combined expandable mechanism is determined; the variation law of the bifurcation point and its positive correlation with the singular value of the balance matrix is analyzed. It is found that adding additional constraints and planning a reasonable path can avoid bifurcation phenomenon. This research provides necessary reference data for configuration design and parameter optimization of the square combined expandable mechanism. © 2019 Journal of Northwestern Polytechnical University.
引用
收藏
页码：1200 / 1208
页数：8
相关论文
共 15 条
  • [1] Chu Z., Deng Z., Qi X., Et al., Modeling and Analysis of a Large Deployable Antenna Structure, Acta Astronautica, 95, 1, pp. 51-60, (2014)
  • [2] You Z., Pellegrino S., Cable-Stiffened Pantographic Deployable Structures. I-Triangular Mast, AIAA Journal, 34, 4, pp. 813-820, (2012)
  • [3] Carpentieri G., Skelton R.E., Fraternali F., A Minimal Mass Deployable Structure for Solar Energy Harvesting on Water Canals, Structural & Multidisciplinary Optimization, 55, 2, pp. 1-10, (2016)
  • [4] Lederman G., You Z., Glisc B., A Novel Deployable Tied Arch Bridge, Engineering Structures, 70, pp. 1-10, (2014)
  • [5] Patel S.N., Gupta S., Reynolds M.S., The Design and Evaluation of an End-User-Deployable, Whole House, Contactless Power Consumption Sensor, Proceedings of the Sigchi Conference on Human Factors in Computing Systems, (2010)
  • [6] Shen J., Lou J., Deng H., Movability and Kinematic Bifurcation Analysis for Pin-Bar Mechanisms, Journal of Zhejiang University, 43, 6, pp. 1083-1089, (2009)
  • [7] Xu J., Studies on the Kinematic Morphology of Pin-Bar Mechanisms, (2007)
  • [8] Xie Y., Guan F., Deployment Analysis of Flexible Structure Based on Characteristics of Creases, Chinese Journal of Engineering Design, 20, 6, pp. 482-488, (2013)
  • [9] Deng H., Kwan A., Unified Classification of Stability of Pin-Jointed Bar Assemblies, International Journal of Solids & Structures, 42, 15, pp. 4393-4413, (2005)
  • [10] Zhang C., Wang S., Yuan R., On Elastodynamic Characteristics of Space Deployable Mechanism, Mechanical Science & Technology for Aerospace Engineering, 26, 11, pp. 1479-1482, (2007)
12