Study of Burning Performance of Pyrotechnic Composition of Impulsive Thruster

被引：0
|
作者：
Jiang X. [1 ]
Zhang C. [1 ]
Yan Z. [1 ]
Yu H. [1 ]
机构：
[1] School of Mechatronic Engineering, Xi'an Technological University, Xi'an, 710021, Shaanxi
来源：
Binggong Xuebao/Acta Armamentarii | 2019年 / 40卷 / 03期
关键词：
Burning rate; Optical fiber test; Pressure exponent; Pyrotechnic composition;
D O I：
10.3969/j.issn.1000-1093.2019.03.007
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The burning rate of pyrotechnic composition of implosive thruster is measured by optical fiber speed-measuring technique, and the effects of the proportion of components and the main charge density on burning rate are studied. The pressure exponent of burning rate is measured by closed-bomb test. The results show that the burning rates of pyrotechnic compositions with different proportions are different at initial stage and are tend to be the same at later stage, and the burning rate increases first and then decreases with the increase in main charge density. The maximum burning rate of pyrotechnic composition can reach 800 m/s at the density of 1.45 g/cm3. The pressure exponent of burning rate is 0.736 4 in the test pressure range. It shows that the pyrotechnic composition can burn stably in a certain pressure range and can satisfy impulsive thrust requirement. © 2019, Editorial Board of Acta Armamentarii. All right reserved.
引用
收藏
页码：500 / 505
页数：5
相关论文
共 7 条
  • [1] Li S.P., Test study and theoretical analysis of short impulse thruster, (2001)
  • [2] Song Q., Dai Z.G., Deng Q.M., Et al., Combustion property of aluminum-free NEPE propellant with low burning rate, Chinese Journal of Explosives & Propellants, 37, 5, pp. 81-84, (2014)
  • [3] Zhou X.Y., Tang G., Pang A.M., Et al., Effect of content of solid components on combustion performance of GAP/CL-20 propellant, Journal of Solid Rocket Technology, 40, 6, pp. 720-724, (2017)
  • [4] Tian C.H., Wang L., Qi X.F., Et al., Study on low pressure combustion characteristic of RDX-CMDB propellants, Science Technology and Engineering, 15, 13, (2015)
  • [5] Yang J.H., Xu J.L., Liu C.F., Et al., A study of combustion characteristics of nitramine propellants, Aerospace Shanghai, 1, pp. 48-51, (2004)
  • [6] Guo W.D., Wang K., Ding W.X., Study of increasing the burning rate of solid propellants by adding fast burning energetic materials, Journal of Propulsion Technology, 19, 3, pp. 89-93, (1998)
  • [7] Li M.M., Li G.X., Application of optical fibers for measuring combustion and detonation velocities, Initiators & Pyrotechnics, 3, pp. 13-16, (2000)
1