Surface Mechanical Properties of Ultrasonic Rolling Micro-forging Additive Manufactured Parts

被引：0
|
作者：
Ren Z.-H. [1 ]
Li Z.-H. [1 ]
Wang Y.-H. [1 ]
Zhang Z.-T. [1 ]
机构：
[1] School of Mechanical Engineering & Automation, Northeastern University, Shenyang
来源：
Dongbei Daxue Xuebao/Journal of Northeastern University | 2023年 / 44卷 / 05期
关键词：
additive part; surface mechanical property; Ti-6Al-4V titanium alloy; ultrasonic rolling micro-forging;
D O I：
10.12068/j.issn.1005-3026.2023.05.004
中图分类号：
学科分类号：
摘要：
Defects such as cracks and high surface roughness are likely to occur in the additive manufacturing of Ti-6Al-4V titanium alloy parts. In order to solve this problem, the ultrasonic rolling micro-forging technology, which is applied in surface strengthening, is combined with the additive manufacturing process. The process of laser fuse additive manufacturing and cooling is simulated by the finite element software, and the effect of ultrasonic rolling micro-forging on the mechanical properties of the additive part surface is analyzed. The results show that the residual stress changes from tensile stress to compressive stress after ultrasonic rolling micro-forging, which effectively reduces the risk of defects such as cracks in additive parts. Meanwhile, the surface equivalent plastic strain and surface micro-hardness of the processed additive increase. In addition, ultrasonic rolling micro-forging has the greatest influence on the contact area of the rolling head. © 2023 Northeastern University. All rights reserved.
引用
收藏
页码：634 / 641
页数：7
相关论文
共 18 条
  • [1] Tan Wei, Yang Xin-jun, Zhou Xin, Numerical analysis of ultrasonic impact treatment to improve the surface state of austenitic stainless steel S30408 [ J ], Chemical Equipment Technology, 38, 4, pp. 20-27, (2017)
  • [2] Zhao X S, Zhao D X, Hu W J, Et al., Manufacturing of high-precision surface micro-structures on stainless steel by ultrasonic impact peening [ J], The International Journal of Advanced Manufacturing Technology, 116, pp. 915-930, (2021)
  • [3] Ma Teng, Song Xiao-yun, Ye Wen-jun, Et al., Effect of ultrasonic impact treatment on the distribution of residual stress in welds of TA15 titanium alloy sheet [ J], Titanium Industry Progress, 34, 1, pp. 26-28, (2017)
  • [4] Yildirim H C, Marquis G B, Barsoum Z., Fatigue assessment of high frequency mechanical impact(HFMI)-improved fillet welds by local approaches [ J ], International Journal of Fatigue, 52, 1, pp. 57-67, (2013)
  • [5] Ye H, Ye K, Guo B G, Et al., Effects of combining ultrasonic micro-forging treatment with laser metal wire deposition on micro-structural and mechanical properties in Ti-6Al-4V alloy [J], Materials Characterization, 162, (2020)
  • [6] Korzynski M., Modeling and experimental validation of the force surface roughness relation for smoothing burnishing with a spherical tool [ J], International Journal of Machine Tools & Manufacture, 47, 12, pp. 1956-1964, (2007)
  • [7] Zhang M, Deng J, Liu Z, Et al., Investigation into contributions of static and dynamic loads to compressive residual stress fields caused by ultrasonic surface rolling[J], International Journal of Mechanical Sciences, 163, (2019)
  • [8] Okawa T, Shimanuki H, Funatsu Y, Et al., Effect of preload and stress ratio on fatigue strength of welded joints improved by ultrasonic impact treatment [ J], Welding in the World, 57, 2, pp. 235-241, (2013)
  • [9] Trudel E, Walker P, Nosir S, Et al., Experimental optimization for fatigue life maximization of additively manufactured Ti-6Al-4V alloy employing ultrasonic impact treatment [ J ], Journal of Materials Engineering and Performance, 30, 4, pp. 2806-2821, (2021)
  • [10] Wu Yong, Deng Wei, Liu Kai, Et al., Effect of interlayer ultrasonic peening on the microstructure and mechanical properties of 2219 aluminum alloy by TIG wire arc additive manufacturing, Aeronautical Science and Technology, 32, 11, pp. 80-86, (2021)
12