Design and Experiment of Flexible Gripper for Mushroom Non-destructive Picking

被引：0
|
作者：
Lu W. [1 ,2 ]
Wang P. [1 ]
Wang L. [1 ,2 ]
Deng Y. [3 ]
机构：
[1] College of Engineering, Nanjing Agricultural University, Nanjing
[2] Jiangsu Province Engineering Laboratory of Modern Facility Agriculture Technology and Equipment, Nanjing
[3] College of Engineering, Michigan State University, East Lansing, 48824, MI
来源：
| 1600年 / Chinese Society of Agricultural Machinery卷 / 51期
关键词：
Flexible gripper; Mushroom; Non-destructive picking;
D O I：
10.6041/j.issn.1000-1298.2020.11.003
中图分类号：
学科分类号：
摘要：
For the automatic and non-destructive picking of the delicate and fragile brown mushroom, the biological and mechanical characteristics of the brown mushroom were firstly analyzed, the constraint equations of grasping force at pulling-off and twisting-off modes were given, and then the twisting-off picking mode was selected as an optimal method. Secondly, by using ANSYS, a finite element analysis software, the static analysis of the flexible finger grasping mushroom was carried out to give the relationships between the grasp force and the flexible finger knots, the diameter of brown mushroom, air pressure. The genetic algorithm was used based on the established evaluation function to obtain the optimal structure of the flexible gripper with three fingers and four knuckles, and the optimal air pressure of 18.65 kPa for grasping. A flexible gripper with three fingers and four knuckles was developed based on the above study. And the brown mushroom picking experiment was carried out, and the results showed that the successful grasping force was reduced to(2.4±0.3)N compared with that of the rigid gripper with (5.6±0.7)N. Moreover, the surface and interior of the grasped mushroom by the developed flexible gripper were intact, while the surface and interior within 5 mm depth of the grasped mushroom were damaged by using a rigid gripper. The research result showed that the designed flexible gripper with three fingers and four knuckles was feasible for brown mushroom picking automatically and non-destructively. © 2020, Chinese Society of Agricultural Machinery. All right reserved.
引用
收藏
页码：28 / 36
页数：8
相关论文
共 39 条
  • [1] CHEN Jian, FANG Hongfeng, ZHENG Yingzi, Integrated pest control technology of bisporous mushroom in Fuzhou, Edible Fungi, 41, 4, pp. 62-63, (2019)
  • [2] RATHORE H, PRASAD S, SHARMA S., Mushroom nutraceuticals for improved nutrition and better human health: a review, Pharma-Nutrition, 5, 2, pp. 35-46, (2017)
  • [3] VALVERDE J., Harvesting and processing of mushrooms: technology and applications, Edible and Medicinal Mushrooms, (2017)
  • [4] VAN GRIENSVEN L J L D., The cultivation of mushrooms: its present status and future developments, Outlook on Agriculture, 16, 3, (1987)
  • [5] LI Qinchuan, HU Ting, WU Chuanyu, Et al., Review of end-effectors in fruit and vegetable harvesting robot, Transactions of the Chinese Society for Agricultural Machinery, 39, 3, pp. 175-179, (2008)
  • [6] ZHANG Sha, FENG Congli, ZHAO Pei, Present situation and development trend of fruit picking device, Technology Innovation and Application, 7, pp. 84-85, (2019)
  • [7] LIU Jizhan, LI Pingping, LI Zhiguo, Hardware design of the end-effector for tomato-harvesting robot, Transactions of the Chinese Society for Agricultural Machinery, 39, 3, pp. 109-112, (2008)
  • [8] JI Chao, FENG Qingchun, YUAN Ting, Et al., Development and performance analysis on cucumber harvesting robot system in greenhouse, Robot, 33, 6, pp. 726-730, (2011)
  • [9] WANG Yi, ZHANG Mao, LIU Bo, Et al., Design and experiment of clamping mechanism about end-effector for citrus harvesting robot, Journal of Agricultural Science and Technology, 21, 4, pp. 61-69, (2019)
  • [10] CHEN Qiyou, YAO Keheng, LIU Shihao, Parametric design and finite element analysis of mango picking machine, Jiangsu Agricultural Sciences, 46, 14, pp. 216-220, (2018)
1234