Effect of combed polyester top content on properties of polyester knitted fabrics

被引：0
|
作者：
Chen K. [1 ]
Zhang D. [2 ]
Ji Y. [3 ]
Le R. [3 ]
Su X. [1 ]
机构：
[1] Key Laboratory of Eco-Textiles(Jiangnan University), Ministry of Education, Wuxi
[2] Wuxi Jinmao Foreign Trade Co., Ltd., Wuxi
[3] Nantong Double Great Textile Co., Ltd., Nantong
来源：
Fangzhi Xuebao/Journal of Textile Research | 2021年 / 42卷 / 09期
关键词：
Combed polyester top; Fabric style; Fiber arrangement; Fuzzess and pilling property; Knitted fabric; Wearability;
D O I：
10.13475/j.fzxb.20210102605
中图分类号：
学科分类号：
摘要：
In order to develop high-quality polyester knitted fabrics, six groups of pure polyester yarns with different combed polyester top content and one group of plain combed polyester yarn were designed, and the corresponding knitted fabrics were prepared. Anti-pilling property, bursting property, fabric style, air permeability and moisture permeability of the fabrics were tested. The results show that the moisture permeability, air permeability, fuzzing and pilling property, bursting property and fabric style are directly affected by the content of combed polyester top. When the content of combed polyester top is 60%-70%, the moisture permeability, bursting behavior and fabric style are regarded as the best, and when the content of combed polyester top is 100%, the properties of air permeability and pilling are the best. When the content of combed polyester top is between 60% and 70%, the wearability of the fabrics has little difference compared with that of the whole combed yarn. For actual production, the use of different contents of the combed polyester top is effective in meeting the requirements for high quality and for saving cost and increasing efficiency. © 2021, Periodical Agency of Journal of Textile Research. All right reserved.
引用
收藏
页码：66 / 69and75
页数：6909
相关论文
共 10 条
  • [1] GAO Huabin, Breaking through the limitation of spinning cotton fiber on comber, the overall technical level reaches international advanced, China Textile, 12, (2018)
  • [2] SUN Langtao, Study on the relationship between structure and air permeability of cotton woven fabric, Journal of Wuhan Textile University, 31, 6, pp. 11-14, (2018)
  • [3] LI Dongping, YIN Hongwei, ZHAO Yanxia, Thermal wet comfort property of pearl fiber knitted fabric, Journal of Textile Reserch, 28, 11, pp. 29-31, (2007)
  • [4] ZHANG Fang, YANG Xiaojing, FAN Yanping, Effect of soft finishing on tearing strength of cotton fabric, Textile Dyeing and Finishing Journal, 40, 6, pp. 13-16, (2018)
  • [5] SONG Bingpeng, Reserch on the properties of combed product and combing product, (2020)
  • [6] ZHANG Junhui, CONG Honglian, Study on bio-based polyamide 56 filament and its fabric properties, Journal of Silk, 55, 12, pp. 25-31, (2018)
  • [7] XIONG Zhizhi, WEN Run, XU Guangbiao, Pilling performance and influencing factors of polyester silk-like fabric, Journal of Silk, 57, 9, pp. 22-26, (2020)
  • [8] PAN Ning, LIN Chengwei, XU Jun, A new method for measuring fabric drape with a novel parameter for classifying fabrics, Fibers, 7, 8, pp. 15-17, (2019)
  • [9] LU Lihua, WU Jian, YE Fang, Influences of fabric structure on creasability and stiffness, Journal of Textile Reserch, 25, 5, pp. 99-101, (2004)
  • [10] XU Fang, LIU Chengxia, YIN Qingyi, Measurement of fabric bending and draping performance with inverse Ωmethod, Journal of Silk, 56, 2, pp. 27-31, (2019)
1