Bonding and anchoring properties of connecting steel bars of prefabricated concrete bridges

被引：0
|
作者：
Hu Z. [1 ]
Yao P. [1 ]
Zhou Z. [1 ]
机构：
[1] School of Transportation, Wuhan University of Technology, Wuhan
来源：
Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology | 2021年 / 53卷 / 03期
关键词：
Anchorage length; Assembled design and construction; Bonding strength; Parametric finite element analysis; Reinforced concrete interface;
D O I：
10.11918/202002060
中图分类号：
学科分类号：
摘要：
To analyze the bonding and anchoring performance of the connecting steel bars of prefabricated concrete bridges and concrete, the steel bar diameter, concrete strength, and anchorage length were taken as test parameters, and 22 pullout test pieces were fabricated for experimental research. The finite element model of the reinforced concrete bonding interface was constructed to analyze the influence of various parameters on the bearing capacity and bonding strength of the test pieces. Based on the experimental data and finite element results, the bonding strength calculation formulas for the connecting steel bars of prefabricated reinforced concrete bridges were fitted and derived. The relevant regulations of domestic and foreign standards for the anchorage length of steel bars were compared and analyzed, and the recommended value for the basic anchorage length of connecting steel bars of prefabricated concrete bridges under different concrete strength levels was given. Results show that for the connecting steel bars of prefabricated components, the bearing capacity of the interface between steel bar and concrete had positive relations with concrete strength, steel bar diameter, and anchorage length. The interface bonding strength was positively correlated with concrete strength, negatively correlated with steel bar diameter, and had little relation with anchorage length. The influence of the anchorage length and the thickness of the protective layer can be ignored when calculating bonding strength. Copyright ©2021 Journal of Harbin Institute of Technology.All rights reserved.
引用
收藏
页码：82 / 93
页数：11
相关论文
共 24 条
  • [1] WANG Sheng, GUI Xiaoming, NING Pinghua, Et al., Development and construction experience of fully assembled spindle in China, Highway and Automobile Transportation, 192, 3, (2019)
  • [2] ZHU Xiaohui, Analysisof construction technology and quality control of new fabricated reinforced concrete bridges, Resource Information and Engineering, 1, (2017)
  • [3] JIANG Qinjian, HUANG Qingjie, CHANG Shuangjiu, Et al., Quality management and acceptance of prefabricated concrete structure engineering, Engineering Quality, 4, (2016)
  • [4] ZHANG Liquan, Review of prefabricated prefabrication technology of bridges, East China Highway, 5, (2015)
  • [5] TIAN Chunyu, HUANG Xiaokun, LI Ran, Et al., Research and application of prefabricated concrete structure, Engineering Quality, 4, (2015)
  • [6] Design and construction guidelines for durability of concrete structures, (2004)
  • [7] GAO Xiangling, LI Naikun, REN Xiaodan, Analytic solution for the bond stress-slip relationship between rebar and concrete, Construction and Building Materials, 197, (2019)
  • [8] YAZICI S, AREL H S., The effect of steel fiber on the bond between concrete and deformed steel bar in SFRCs, Construction and Building Materials, 40, (2013)
  • [9] XU Youlin, SHEN Wendu, WANG Hong, Experimental study on bonding and anchoring performance of reinforced concrete, Journal of Building Structures, 3, (1994)
  • [10] YU Qiong, XU Xuejing, YOU Gaoshuai, Experimental study on bond behavior for ribbed steel bars and grout, Journal of Harbin Institute of Technology, 49, 12, (2017)
123