Analysis for fatigue life of wind turbine main bearing with surface hardened raceways

被引：0
|
作者：
Li Y. [1 ,2 ]
Gao Y. [3 ]
Jia L. [1 ]
机构：
[1] School of Mechatronics Engineering, Henan University of Science and Technology, Luoyang
[2] Collaborative Innovation Center of Machinery Equipment Advanced Manufacturing of Henan Province, Luoyang
[3] Luoyang Bearing Research Institute Co., Ltd., Luoyang
来源：
Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2022年 / 43卷 / 06期
关键词：
Fatigue life; Load distribution; Roller bearing; Surface hardening; Wind turbines;
D O I：
10.19912/j.0254-0096.tynxb.2020-1075
中图分类号：
学科分类号：
摘要：
A fatigue life analysis method for wind turbine main bearing with the type of three-row cylindrical roller and surface hardened raceways was established. Firstly, a 5-DOF mechanical model of three-row of cylindrical roller wind turbine main bearing was established in the Cartier coordinate system, and the internal roller load distribution of the bearing under the combined action of external loads in five directions was analyzed and calculated. Then, the elastoplastic contact finite element model between the cylindrical roller and the surface hardened raceway was established, and the pulsating stress distribution under the raceway surface caused by the roller contact load was calculated. Finally, the pulsation stress amplitude was converted into alternating stress amplitude by using Goodman equation, and Basquin stress-life theory was used to calculate the fatigue life of wind turbine main bearing. The results show that the downwind outer ring raceway of the bearing bears the thrust load from the wind rotor and has the shortest fatigue life, while the radial outer ring raceway bears the gravity load of the wind rotor and has the longest fatigue life. The fatigue life of the bearing depends on the downwind raceway. © 2022, Solar Energy Periodical Office Co., Ltd. All right reserved.
引用
收藏
页码：176 / 182
页数：6
相关论文
共 12 条
  • [1] ZHENG L Z., Contact analysis and optimal design of main bearing of wind turbine, (2016)
  • [2] LI R L, DUAN B Z, YANG M C, Et al., Load distribution and life calculation of double row tapered roller bearings for wind turbines, Bearing, 5, pp. 1-6, (2018)
  • [3] JIA X Z, MA J H, MENG Y W., Calculation on fatigue Life of three row cylindrical roller bearings for main shaft in wind turbines based on DesignLife, Bearing, 12, pp. 5-8, (2018)
  • [4] YU C L, LIU H H, GUO Y F., Calculation of fatigue life of three-row roller slewing bearing, Bearing, 8, pp. 7-8, (2011)
  • [5] AGUIRREBEITIA J, ABASOLO M, AVILES R, Et al., Theoretical calculation of general static load)carrying capacity for the design and selection of three row roller slewing bearings, Mechanism and machine theory, 48, pp. 52-61, (2012)
  • [6] LUDWIK K., Modelling of rollers in calculation of slewing bearing with the use of finite elements, Mechanism and machine theory, 41, pp. 1359-1376, (2006)
  • [7] GONCZ P, DROBNE M, GLODEZ S., Computational model for determination of dynamic load capacity of large three-row roller slewing bearings, Engineering failure analysis, 32, pp. 44-53, (2013)
  • [8] GONCZ P, POTOCNIK R, GLODEZ S., Computational model for determination of static load capacity of three-row roller slewing bearings with arbitrary clearances and predefined raceway deformations, International journal of mechanical sciences, 73, pp. 82-92, (2013)
  • [9] HE P Y, LIU R, HONG R J, Et al., Hardened raceway calculation analysis of a three-row roller slewing bearing, International journal of mechanical sciences, 137, pp. 133-144, (2018)
  • [10] BASAN R, FRANULOVIC M, PREBIL I, Et al., Study on Ramberg-Osgood and Chaboche models for 42CrMo4 steel and some approximations, Journal of constructional steel research, 136, pp. 65-74, (2017)
12