DENSIFICATION OF GAMMA-TIAL POWDER BY HOT ISOSTATIC PRESSING

被引：0
|
作者：
BEDDOES, JC [1 ]
WALLACE, W [1 ]
DEMALHERBE, MC [1 ]
机构：
[1] NATL RES COUNCIL CANADA,INST AEROSP RES,STRUCT & MAT LAB,OTTAWA K1A 0R6,ONTARIO,CANADA
来源：
INTERNATIONAL JOURNAL OF POWDER METALLURGY | 1992年 / 28卷 / 03期
关键词：
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The microstructural characteristics of Ti-54a/oAl and Ti-48a/oAl-2a/oW were investigated by optical and scanning electron microscopy in order to elucidate the microstructural evolution occurring during powder manufacture. Both powder compositions were consolidated by HIPing in the temperature range 1025 to 1250-degrees-C and the consolidated microstructures and hardness evaluated. The results show that a HIP temperature > 1100-degrees-C is necessary to eliminate all porosity. The HIPed compacts exhibit a non-uniform grain size which is associated with a varying volume fraction of dendrite regions in the powder. The hardness of the binary alloy is less than that of the ternary alloy. The hardness of both alloys decreases with increasing HIPing temperature.
引用
收藏
页码：313 / 325
页数：13
相关论文
共 50 条
  • [1] HOT ISOSTATIC PRESSING OF GAMMA-TIAL ALLOYS AND GAMMA-TIAL METAL MATRIX COMPOSITES
    SHONG, DS
    KIM, YW
    YOLTON, CF
    FROES, FH
    1989 ADVANCES IN POWDER METALLURGY, VOLS 1-3, 1989, 1-3 : C359 - C371
  • [2] DENSIFICATION OF TITANIUM POWDER DURING HOT ISOSTATIC PRESSING
    LOGRASSO, BK
    KOSS, DA
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1988, 19 (07): : 1767 - 1773
  • [3] Modeling of Metal Powder Densification under Hot Isostatic Pressing
    Wang, Jingzhe
    Srivatsa, Shesh
    Wu, Zhanfang
    Huang, Zaiwang
    MATERIALS, 2024, 17 (08)
  • [4] Densification Modeling of Titanium Alloy Powder during Hot Isostatic Pressing
    Xue, Y.
    Lang, L. H.
    Bu, G. L.
    Li, L.
    SCIENCE OF SINTERING, 2011, 43 (03) : 247 - 260
  • [5] Densification behaviour of titanium alloy powder under hot isostatic pressing
    Kim, KT
    Yang, HC
    POWDER METALLURGY, 2001, 44 (01) : 41 - 47
  • [6] A DENSIFICATION SENSOR FOR HOT ISOSTATIC PRESSING
    KAHN, AH
    CLOUGH, RB
    GEFEN, Y
    MESTER, M
    BIANCANIELLO, F
    WADLEY, HNG
    JOURNAL OF METALS, 1987, 39 (07): : A39 - A39
  • [7] Processing of nanostructured gamma TiAl by mechanical alloying and hot isostatic pressing
    Froes, FH
    Suryanarayana, C
    Srisukhumbowornchai, N
    Chen, X
    Mukhopadhyay, DK
    Öveçoglu, ML
    Brand, K
    Hebeisen, J
    ADVANCES IN THE SCIENCE AND TECHNOLOGY OF TITANIUM ALLOY PROCESSING, 1996, : 387 - 395
  • [8] DENSIFICATION MECHANISM OF TiAl PRE-ALLOY POWDERS CONSOLIDATED BY HOT ISOSTATIC PRESSING AND EFFECTS OF HEAT TREATMENT ON THE MICROSTRUCTURE OF TiAl POWDER COMPACTS
    Wang Gang
    Xu Lei
    Cui Yuyou
    Yang Rui
    ACTA METALLURGICA SINICA, 2016, 52 (09) : 1079 - 1088
  • [9] An investigation of densification behavior of nickel alloy powder during hot isostatic pressing
    ElRakayby, Hosam
    Kim, HongKyu
    Hong, SungSuk
    Kim, KiTae
    ADVANCED POWDER TECHNOLOGY, 2015, 26 (05) : 1314 - 1318
  • [10] Densification mechanisms during hot isostatic pressing of stainless steel powder compacts
    Kim, HS
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 123 (02) : 319 - 322
12345