Prediction of adhesive flank wear of the cutting tool with carbide cutting inserts at high speed turning

被引：0
|
作者：
Simsive, Z. V. [1 ]
Kutyshkin, A. V. [2 ]
Simsive, D. T. [3 ]
机构：
[1] Altai State Tech Univ, Rubtsovsk Ind Inst Branch, Rubtsovsk, Altai Territory, Russia
[2] Novosibirsk State Tech Univ, Novosibirsk 630092, Russia
[3] PMR EPM, JSC Russian Railways, Rubtsovsk, Russia
来源：
OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE | 2011年 / 02期
关键词：
wear of the cutting tool; flank wear of the cutting tool; adhesion wear; high speed turning;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In article the model of adhesive flank wear of the cutting tool with carbide cutting inserts is offered at high speed orthogonal turning constructional steels. Shows the calculated wear of cutting tools in comparison with the results of experimental studies published in the press.
引用
收藏
页码：23 / 26
页数：4
相关论文
共 50 条
  • [1] Estimation of the tool crater wear of the cutting tool with carbide cutting inserts in turning
    Simsive, J. V.
    Kutyshkin, A. V.
    Simsive, D. C.
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2012, (01): : 50 - 55
  • [2] PREDICTION OF ADHESIVE FLANK WEAR OF THE CUTTING TOOL
    Shashok, A. V.
    Kutyshkin, A. V.
    Frolov, E. A.
    Kogemyko, I. V.
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2011, (01): : 23 - 26
  • [3] Prediction of fatigue failure of the cutting tool with carbide cutting inserts at orthogonal turning
    Simsive, D. C.
    Simsive, J. V.
    Kutyshkin, A. V.
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2012, (03): : 52 - 55
  • [4] The Effects of Cutting Speed on Tool Wear and Tool Life When Turning Inconel 718 with Ceramic and Coated Carbide Inserts
    Taskesen, A.
    Altin, A.
    Nalbant, M.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2007, 60 (04) : 445 - 449
  • [5] Flank wear detection of cutting tool inserts in turning operation: application of nonlinear time series analysis
    Rajesh, V. G.
    Namboothiri, V. N. Narayanan
    SOFT COMPUTING, 2010, 14 (09) : 913 - 919
  • [6] Flank wear detection of cutting tool inserts in turning operation: application of nonlinear time series analysis
    V. G. Rajesh
    V. N. Narayanan Namboothiri
    Soft Computing, 2010, 14 : 913 - 919
  • [7] Tool Wear of Carbide Cutting Inserts Coated with TiAlN and AlTiSiN in Finish Turning of Inconel 718
    Lisowicz, Joanna
    Habrat, Witold
    Krupa, Krzysztof
    Fieden, Mateusz
    ADVANCES IN MANUFACTURING ENGINEERING AND MATERIALS II, ICMEM 2020, 2021, : 226 - 235
  • [8] Investigating Flank Wear and Cutting Force on Hard Steels by CBN Cutting Tool by Turning
    Thamizhmanii, S.
    Hasan, S.
    WORLD CONGRESS ON ENGINEERING 2008, VOL III, 2008, : 1819 - 1823
  • [9] Modeling flank wear of carbide tool insert in metal cutting
    Luo, X
    Cheng, K
    Holt, R
    Liu, X
    WEAR, 2005, 259 : 1235 - 1240
  • [10] Tool Wear of PVD Coated Carbide Inserts in High Speed Turning Inconel 718
    Song, X. Y.
    Zhao, J.
    ADVANCED MECHANICAL ENGINEERING, PTS 1 AND 2, 2010, 26-28 : 988 - 992
12345