A STUDY OF PASSIVE AND ADAPTIVE HYDRAULIC ENGINE MOUNT SYSTEMS WITH EMPHASIS ON NONLINEAR CHARACTERISTICS

Passive hydraulic mounts exhibit excitation frequency variant and deflection amplitude sensitive stiffness and damping properties. Such non-linear dynamic characteristics are examined by using analytical and experimental methods, both at the device level and within the context of a simplified vehicle model. A new lumped parameter non-linear mathematical model of the hydraulic mount is developed by simulating its decoupler switching mechanism and inertia track dynamics. The low frequency performance features and limitations of several passive mounts are made clear through the non-linear vehicle model simulation and comparable laboratory vibration tests. The high frequency performance problems of the passive hydraulic mount are identified by applying the quasi-linear analysis method. Based on these results, a new adaptive mount system is developed which exhibits broad bandwidth performance features up to 250 Hz. It implements an on-off damping control mode by using engine intake manifold vacuum and a microprocessor based solenoid valve controller. A laboratory bench set-up has already demonstrated its operational feasibility. Through analytical methods, it is observed that our adaptive mount provides superior dynamic performance to passive engine mounts and comparable performance to a small scale active mount over a wide frequency range, given the engine mounting resonance control, shock absorption and vibration isolation performance requirements. Although technical prospects of the proposed adaptive system appear promising, the in situ performance needs to be evaluated.