A Low-Cost Simulation Model for Endoscopic-Assisted Sagittal Craniosynostosis Repair

OBJECTIVE: The objective is to introduce a low-cost simulation model for endoscopic-assisted sagittal cranio-synostosis repair in which bleedings can be simulated and to present the initial experience using the model as a learning tool. METHODS: A 3-dimensional synthetic skull was printed using polylactic acid. The brain, dura mater, sagittal sinus, and skin were constructed using low-cost materials. The simulation was performed at Garrahan Pediatric Hospital's simulation center employing a rigid endoscope Wes Pilot HD 0 degrees 4 mm). RESULTS: A low-cost simulation model for sagittal craniosynostosis was built in order to recreate the steps needed to perform a strip craniectomy with lateral extensions. The initial estimated cost is 10 U.S. dollars, and subsequent uses cost approximately 2 U.S. dollars. Four training sessions were performed, and a reduction in surgical time was recorded from 125 to 80 minutes. CONCLUSIONS: We introduce a low-cost simulation model for scaphocephaly endoscopic-assisted surgery in which bleeding can be reproduced. The initial experience shows the possibility of using the model as a learning tool.