MICROMACHINED CAPACITIVE ACCELEROMETER

被引：8
|
作者：
GERLACHMEYER, UE
机构：
[1] Electronic Systems Department, Battelle-Institut e.V., D-6000 Frankfurt am Main 90
来源：
SENSORS AND ACTUATORS A-PHYSICAL | 1991年 / 27卷 / 1-3期
关键词：
D O I：
10.1016/0924-4247(91)87050-D
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
A capacitive accelerometer has been fabricated from Si 110 wafers using the silicon micromachining technique. The sensor basically consists of an elastically suspended plate between two fixed capacitor plates, forming a differential capacitor. The central plate is equipped with several slits, which reduces the air damping and enhances the dynamic behaviour. A sensor with a sufficient number of slits detects accelerations up to 1000 Hz with a signal deviation of less than 10%, while a sensor with no slits reaches the same deviation already around 50 Hz. The experimental data have been fitted with the theoretical curve, and the damping and resonance frequency are determined for different numbers of slits.
引用
收藏
页码：555 / 558
页数：4
相关论文
共 50 条
  • [1] Micromachined capacitive accelerometer
    Gerlach-Meyer, U.E., 1600, (27): : 1 - 3
  • [2] A novel micromachined accelerometer capacitive interface
    Kraft, M
    Lewis, C
    Hesketh, T
    Szymkowiak, S
    SENSORS AND ACTUATORS A-PHYSICAL, 1998, 68 (1-3) : 466 - 473
  • [3] Research on dynamic behavior of micromachined capacitive accelerometer
    Chen, Yuxiao
    Wen, Guiyin
    Liu, Changxiao
    Dianzi Keji Daxue Xuebao/Journal of the University of Electronic Science and Technology of China, 2002, 31 (05):
  • [4] The characterization of a miniature silicon micromachined capacitive accelerometer
    Puers, R
    Reyntjens, S
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 1998, 8 (02) : 127 - 133
  • [5] Switched current interface circuit for capacitive micromachined accelerometer
    Rubio, C
    Ruiz, O
    Bota, S
    Samitier, J
    IMTC/99: PROCEEDINGS OF THE 16TH IEEE INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE, VOLS. 1-3, 1999, : 458 - 463
  • [6] Verilog-A Modeling and Design of a Micromachined Capacitive Accelerometer
    Li Haojiong
    Zhang Mingming
    Chen Zhongjian
    Huang Jingqing
    Meng Xiangyun
    Lu Wengao
    Zhang Yacong
    Su Weiguo
    Li Song
    2011 INTERNATIONAL CONFERENCE OF ELECTRON DEVICES AND SOLID-STATE CIRCUITS (EDSSC), 2011,
  • [7] High resolution analog interface for micromachined capacitive accelerometer
    Aaltonen, Lasse
    Rahikkala, Pasi
    Saukoski, Mikko
    Halonen, Kari
    2007 EUROPEAN CONFERENCE ON CIRCUIT THEORY AND DESIGN, VOLS 1-3, 2007, : 96 - 99
  • [8] Open-loop operating mode of micromachined capacitive accelerometer
    Li, BQ
    Lu, DR
    Wang, WY
    SENSORS AND ACTUATORS A-PHYSICAL, 2000, 79 (03) : 219 - 223
  • [9] Design and noise analysis of a sigma-delta capacitive micromachined accelerometer
    Liu Yuntao
    Liu Xiaowei
    Chen Weiping
    Wu Qun
    JOURNAL OF SEMICONDUCTORS, 2010, 31 (05) : 0550061 - 0550066
  • [10] Modeling and noise analysis of a fence structure micromachined capacitive accelerometer system
    Department of Information Science and Electronic Engineering, Zhejiang University, Hangzhou
    310027, China
    不详
    100854, China
    J. Zhejiang Univ. Sci. C, 12 (1009-1015): : 1009 - 1015
12345