APPLICATION OF A FAST TOOL SERVO FOR DIAMOND TURNING OF NONROTATIONALLY SYMMETRICAL SURFACES

被引：70
|
作者：
DOW, TA
MILLER, MH
FALTER, PJ
机构：
[1] Precision Engineering Center, North Carolina State University
[2] Westinghouse Defense and Electronic Systems, Orlando, FL
来源：
PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING | 1991年 / 13卷 / 04期
关键词：
DIAMOND TURNING; PZT ACTUATORS; FAST TOOL SERVO; NONROTATIONALLY SYMMETRICAL SURFACES; REFERENCE SURFACE; SPINDLE GROWTH CORRECTION; REAL-TIME CONTROL;
D O I：
10.1016/0141-6359(91)90001-Y
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The fabrication of nonrotationally symmetric surfaces by diamond turning requires tool actuation at a bandwidth significantly higher than the rotational frequency of the surfaces. This requirement cannot be met by standard slide drives due to their large mass and consequent low natural frequency. This article describes the development of a laboratory-scale diamond-turning machine with piezoelectric-driven fast tool servo. The capability of this apparatus will be demonstrated for high-speed features such as sine wave, square wave, and ramp-shaped surfaces. Also described is the implementation of this fast tool servo on a commercial diamond-turning machine. Several nonrotationally symmetric surfaces have been machined, and their images are included.
引用
收藏
页码：243 / 250
页数：8
相关论文
共 50 条
  • [1] DESIGN AND TESTING OF A FAST TOOL SERVO FOR DIAMOND TURNING
    PATTERSON, SR
    MAGRAB, EB
    PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1985, 7 (03): : 123 - 128
  • [2] A Two-DOF Fast Tool Servo for Optical Freeform Surfaces Diamond Turning
    Liu, Qiang
    Zhou, Xiaoqin
    Xu, Pengzi
    Zhang, Xu
    ADVANCES IN MECHANICAL ENGINEERING, 2014,
  • [3] Design and Control of a Piezoelectrically Actuated Fast Tool Servo for Diamond Turning of Microstructured Surfaces
    Zhu, Zhiwei
    Chen, Li
    Huang, Peng
    Schoenemann, Lars
    Riemer, Oltmann
    Yao, Jianyong
    To, Suet
    Zhu, Wu-Le
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2020, 67 (08) : 6688 - 6697
  • [4] Optimized tool path generation for fast tool servo diamond turning of micro-structured surfaces
    De Ping Yu
    Sze Wei Gan
    Yoke San Wong
    Geok Soon Hong
    Mustafizur Rahman
    Jin Yao
    The International Journal of Advanced Manufacturing Technology, 2012, 63 : 1137 - 1152
  • [5] Optimized tool path generation for fast tool servo diamond turning of micro-structured surfaces
    Yu, De Ping
    Gan, Sze Wei
    Wong, Yoke San
    Hong, Geok Soon
    Rahman, Mustafizur
    Yao, Jin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 63 (9-12): : 1137 - 1152
  • [6] A Fast Tool Servo System for Fabrication of Micro-structured Surfaces on A Diamond Turning Machine
    王晓慧
    Journal of Wuhan University of Technology(Materials Science), 2009, (S1) : 111 - 114
  • [7] Profile error compensation in fast tool servo diamond turning of micro-structured surfaces
    Yu, De Ping
    Hong, Geok Soon
    Wong, Yoke San
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2012, 52 (01): : 13 - 23
  • [8] Fast tool servo diamond turning of optical freeform surfaces for rear-view mirrors
    Fujing Tian
    Ziqiang Yin
    Shengyi Li
    The International Journal of Advanced Manufacturing Technology, 2015, 80 : 1759 - 1765
  • [9] Fast tool servo diamond turning of optical freeform surfaces for rear-view mirrors
    Tian, Fujing
    Yin, Ziqiang
    Li, Shengyi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 80 (9-12): : 1759 - 1765
  • [10] Implementation of a fast tool servo with repetitive control for diamond turning
    Crudele, M
    Kurfess, TR
    MECHATRONICS, 2003, 13 (03) : 243 - 257
12345