METHOD DEVELOPMENT FOR THE CALCULATION OF THE METAL DRAWING PASSES SCHEDULE TO WHICH THE HOLLOMON CURVE APPLIES

被引：0
|
作者：
Jokovic, Zivko [1 ]
Djapic, Nina [2 ]
机构：
[1] Higher Tech Sch, Skolska 1, Novi Sad 21000, Serbia
[2] Univ Novi Sad, Tech Fac Mihajlo Pupin, Zrenjanin 23000, Serbia
来源：
UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES B-CHEMISTRY AND MATERIALS SCIENCE | 2013年 / 75卷 / 03期
关键词：
CuNi2Si; passes schedule; metal drawing; Hollomon curve;
D O I：
暂无
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
Starting from the assumption that the hardening curve (the effective stress) during the metal cold drawing can be mathematically interpreted using a theoretical method for calculating the deformation stress state, the lower and upper bound solution, it was possible to develop a method for the calculation of the passes schedule. The theoretical analysis gave a complete insight into the process. The mathematical interpretation of the Hollomon curve was determined based on the experiments for the CuNi2Si alloy that was used for the method development and analysis.
引用
收藏
页码：165 / 174
页数：10
相关论文
共 10 条
  • [1] Development method of drawing technological processes based on sheet metal materials anisotropy
    Zharkov, V.A.
    Kuznechno-Shtampovochnoe Proizvodstvo, 1991, (09): : 12 - 15
  • [2] Development of an Adapting Density Calibration Curve Method for Dose Calculation on Ethos Hypersight CBCT
    Kuo, L.
    Hu, Y. C.
    Lim, S. B. G.
    Zhang, P.
    Aristophanous, M.
    Savacool, M. K.
    Cervino, L. I.
    MEDICAL PHYSICS, 2024, 51 (10) : 7753 - 7753
  • [3] A Novel Method for Friction Coefficient Calculation in Metal Sheet Forming of Axis-Symmetric Deep Drawing Parts
    Xia, Jiansheng
    Zhao, Jun
    Dou, Shasha
    Shen, Xing
    SYMMETRY-BASEL, 2022, 14 (02):
  • [4] METHOD FOR CALCULATION CONCENTRATIONS OF THOSE 2 PHASES WHICH FORM A MOLTEN 2-COMPONENT METAL-ALLOY
    STEEB, S
    ACTA CRYSTALLOGRAPHICA SECTION A-CRYSTAL PHYSICS DIFFRACTION THEORETICAL AND GENERAL CRYSTALLOGRAPHY, 1969, A 25 : S18 - &
  • [5] Development of calculation method for melting amount mass of contact wire caused by melting and evaporation of molten metal bridge and arc generation
    Morishita, Honoka
    Maeda, Yoshifumi
    Ren, Zhenwei
    Nemoto, Yusuke
    Hayasaka, Takamasa
    Iwao, Toru
    ELECTRICAL ENGINEERING IN JAPAN, 2022, 215 (03)
  • [6] Development of Calculation Method for Melting Amount Mass of Contact Wire Caused by Melting and Evaporation of Molten Metal Bridge and Arc Generation
    Morishita H.
    Maeda Y.
    Ren Z.
    Nemoto Y.
    Hayasaka T.
    Iwao T.
    IEEJ Transactions on Industry Applications, 2022, 142 (05) : 410 - 417
  • [7] Development of a limited sampling method (LSM) for calculation of area under the curve (AUC) of concentration of busulphan (BU) vs time in children undergoing bone marrow transplantation (BMT)
    Chattergoon, DS
    Koren, G
    Saunders, EF
    BLOOD, 1995, 86 (10) : 3750 - 3750
  • [8] Development of multi-group Monte-Carlo transport and depletion coupling calculation method and verification with metal-fueled fast reactor
    Guo, Hui
    Wu, Yi-Wei
    Song, Qu-Fei
    Shen, Yu-Yang
    Gu, Han-Yang
    NUCLEAR SCIENCE AND TECHNIQUES, 2023, 34 (11)
  • [9] Development of multi-group Monte-Carlo transport and depletion coupling calculation method and verification with metal-fueled fast reactor
    Hui Guo
    Yi-Wei Wu
    Qu-Fei Song
    Yu-Yang Shen
    Han-Yang Gu
    NuclearScienceandTechniques, 2023, 34 (11) : 24 - 43
  • [10] Development of multi-group Monte-Carlo transport and depletion coupling calculation method and verification with metal-fueled fast reactor
    Hui Guo
    Yi-Wei Wu
    Qu-Fei Song
    Yu-Yang Shen
    Han-Yang Gu
    Nuclear Science and Techniques, 2023, 34
1