INFLUENCE OF STERILIZATION OF A PRODUCT MANUFACTURED USING FDM TECHNOLOGY ON ITS DIMENSIONAL ACCURACY

被引：5

作者：

Kuczko, Wieslaw ^{[1
]}

Wichniarek, Radoslaw ^{[1
]}

Gorski, Filip ^{[1
]}

Banaszewski, Jacek ^{[2
]}

机构：

[1] Poznan Univ Tech, Chair Prod Engn & Management, Poznan, Poland

[2] Poznan Univ Med Sci, Dept Otolaryngol Head & Neck Surg, Poznan, Poland

来源：

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL | 2018年 / 12卷 / 01期

关键词：

medical; additive manufacturing; Fused Deposition Modelling; geometric accuracy;

D O I：

10.12913/22998624/80849

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Inter-operational surgery supplies manufactured additively using the FDM (Fused Deposition Modelling) technology are required to be sterilized before use. After manufacturing, the part should be sterilized using one of commonly used processes, without losing its dimensions and shape. The paper presents studies on manufacturing and sterilizing samples made out of ABS material and influence of the sterilization process on the dimensional accuracy of these samples.

引用

页码：74 / 79

页数：6

共 50 条

[1] INFLUENCE OF PROCESS PARAMETERS ON DIMENSIONAL ACCURACY OF PARTS MANUFACTURED USING FUSED DEPOSITION MODELLING TECHNOLOGY
Gorski, Filip
Kuczko, Wieslaw
Wichniarek, Radoslaw
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2013, 7 (19): : 27 - 35
[2] Accuracy of Rapid Prototyped models with using of FDM technology
Beniak, Juraj
Krizan, Peter
Matus, Milos
INDUSTRIAL AND SERVICE ROBOTICS, 2014, 613 : 390 - 395
[3] Experimental investigation for dynamic stiffness and dimensional accuracy of FDM manufactured part using IV-Optimal response surface design
Mohamed, Omar Ahmed
Masood, Syed Hasan
Bhowmik, Jahar Lal
RAPID PROTOTYPING JOURNAL, 2017, 23 (04) : 736 - 749
[4] A numerical and experimental study of the compression uniaxial properties of PLA manufactured with FDM technology based on product specifications
Manuel Mercado-Colmenero, Jorge
Angel Rubio-Paramio, Miguel
la Rubia-Garcia, Ma Dolores
Lozano-Arjona, David
Martin-Donate, Cristina
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 103 (5-8): : 1893 - 1909
[5] A numerical and experimental study of the compression uniaxial properties of PLA manufactured with FDM technology based on product specifications
Jorge Manuel Mercado-Colmenero
Miguel Angel Rubio-Paramio
Mª Dolores la Rubia-Garcia
David Lozano-Arjona
Cristina Martin-Doñate
The International Journal of Advanced Manufacturing Technology, 2019, 103 : 1893 - 1909
[6] Organic transistors manufactured using inkjet technology with subfemtoliter accuracy
Sekitani, Tsuyoshi
Noguchi, Yoshiaki
Zschieschang, Ute
Klauk, Hagen
Someya, Takao
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, 2008, 105 (13) : 4976 - 4980
[7] Quality of 3D Printed Objects Using Fused Deposition Modeling (FDM) Technology in Terms of Dimensional Accuracy
Aljazara, Alaa
Abu Tuhaimer, Nadine
Alawwad, Ahmed
Hani, Khalid Bani
Qusef, Abdallah D.
Alsalhi, Najeh Rajeh
Al-Dawoodi, Aras
INTERNATIONAL JOURNAL OF ONLINE AND BIOMEDICAL ENGINEERING, 2023, 19 (14) : 45 - 62
[8] ANALYSIS OF THE DIMENSIONAL ACCURACY OF CASTING MODELS MANUFACTURED BY FUSED DEPOSITION MODELING TECHNOLOGY
Adamczak, S.
Zmarzly, P.
Kozior, T.
Gogolewski, D.
ENGINEERING MECHANICS 2017, 2017, : 66 - 69
[9] Determination of the influence of infill pattern and fiberglass reinforcement on the tensile properties of additively manufactured material by FDM technology
Marko Delić
Vesna Mandić
Srbislav Aleksandrović
Dušan Arsić
Journal of Mechanical Science and Technology, 2023, 37 : 5569 - 5575
[10] Determination of the influence of infill pattern and fiberglass reinforcement on the tensile properties of additively manufactured material by FDM technology
Delic, Marko
Mandic, Vesna
Aleksandrovic, Srbislav
Arsic, Dusan
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2023, 37 (11) : 5569 - 5575

← 1 2 3 4 5 →