ANALYSIS OF THE EFFECTS OF AN ELECTROMAGNETIC BRAKE(EMBR) ON FLOW BEHAVIORS IN THE LARGE SLAB CONTINUOUS CASTING MOLD

被引：0
|
作者：
Xu, C. J. [1 ]
Zhang, X. J. [1 ]
Li, J. [1 ]
Wang, Z. Y. [1 ]
Zhang, L. W. [1 ]
机构：
[1] Univ Sci & Technol Liaoning, Sch Mat & Met, Liaoning, Peoples R China
来源：
METALURGIJA | 2016年 / 55卷 / 03期
关键词：
steel; large slab continuous caster; electromagnetic brake; fluid flow; numerical simulation;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In the present paper, molten steel flow in the submerged entry nozzle (SEN) and mold cavity of large slab continuous caster in both environments (with EMBR and without EMBR) were investigated with the method of numerical simulation. In addition, the impacts of electromagnetic brake (EMBR) on mol ten steel flow and meniscus fluctuation were discussed while the bath meniscus fluctuation was monitored in a steel plant. Computation results were compared with experimental findings of the factory and it is verified that EMBR can be an efficient technology to control liquid steel flow behaviors in the large slab continuous casting mold.
引用
收藏
页码：317 / 320
页数：4
相关论文
共 50 条
  • [1] STUDY ON THE FLUID FLOW IN SLAB CONTINUOUS CASTING MOLD WITH ELECTROMAGNETIC BRAKE
    Yu Zhan
    Zhang Zhenqiang
    Ren Zhongming
    Lei Zuosheng
    Deng Kang
    ACTA METALLURGICA SINICA, 2010, 46 (10) : 1275 - 1280
  • [2] Effects of electromagnetic brake on vortex flows in thin slab continuous casting mold
    Li, Baokuan
    Tsukihashi, Fumitaka
    ISIJ INTERNATIONAL, 2006, 46 (12) : 1833 - 1838
  • [3] Effects of electromagnetic brake on vortex flows in thin slab continuous casting mold
    School of Materials and Metallurgy, Northeastern University, Wenhua Road 3-11, Heping District, Shenyang, 110004, China
    不详
    ISIJ Int, 12 (1833-1838):
  • [4] Distribution of Defects in Slab and Suppression of Unbalanced Flow by Electromagnetic Brake in Continuous Casting Mold
    Furumai, Kohei
    Matsui, Yutaka
    Murai, Takeshi
    Miki, Yuji
    AISTECH 2013: PROCEEDINGS OF THE IRON & STEEL TECHNOLOGY CONFERENCE, VOLS I AND II, 2013, : 1337 - 1342
  • [5] Influence of electromagnetic brake on flow field of liquid steel in the slab continuous casting mold
    Yu Haiqi
    Wang Baofeng
    Li Huiqin
    Li Jianchao
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 202 (1-3) : 179 - 187
  • [6] Multiphase flow phenomena in a slab continuous casting mold with electromagnetic brake and argon gas injection
    Yu Haiqi
    Zhu Miaoyong
    ACTA METALLURGICA SINICA, 2008, 44 (05) : 619 - 625
  • [7] NUMERICAL INVESTIGATION OF THE FLOW AND STEEL/SLAG INTERFACE BEHAVIORS IN SLAB CONTINUOUS CASTING MOLD WITH ELECTROMAGNETIC BRAKE AND ARGON GAS INJECTION
    Zhu, Miaoyong
    Yu, Haiqi
    JIM EVANS: HONORARY SYMPOSIUM, 2010, 2010, : 95 - 102
  • [8] A narrative review: The electromagnetic field arrangement and the "braking" effect of electromagnetic brake (EMBr) technique in slab continuous casting
    Li, Zhuang
    Zhang, Lintao
    Ma, Danzhu
    Lavery, Nicholas P.
    Wang, Engang
    METALLURGICAL RESEARCH & TECHNOLOGY, 2021, 118 (02)
  • [9] FLOW FIELD CONTROL OF LIQUID STEEL IN THE MOLD OF CONTINUOUS CASTER BY ELECTROMAGNETIC BRAKE, EMBR
    SUZUKI, KI
    MURATA, K
    NAKANISHI, K
    KODAMA, M
    KOJIMA, S
    MIYAZAKI, Y
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1983, 23 (03) : B84 - B84
  • [10] Impact of the Electromagnetic Brake Position on the Flow Structure in a Slab Continuous Casting Mold: An Experimental Parameter Study
    Dennis Schurmann
    Ivan Glavinić
    Bernd Willers
    Klaus Timmel
    Sven Eckert
    Metallurgical and Materials Transactions B, 2020, 51 : 61 - 78
12345