Effect of Aluminium Content on the Tensile Properties of Mg-Al-Zn Alloys

被引：0
|
作者：
Latif, N. Abdul [1 ]
Sajuri, Z. [1 ]
Syarif, J. [1 ]
机构：
[1] Univ Kebangsaan Malaysia, Fac Engn & Built Environm, Dept Mech & Mat Engn, Ukm Bangi 43600, Selangor De, Malaysia
来源：
JURNAL KEJURUTERAAN | 2014年 / 26卷
关键词：
Magnesium alloys; aluminium content; microstructure; tensile properties; work hardening;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The aim of this study is to investigate the effect of aluminium content on microstructure, tensile properties and work hardenability of Mg-Al-Zn alloys. Two types of magnesium alloys were investigated i.e. AZ31 and AZ61, where the aluminium contents were 3% and 6%, respectively. Microstructure observation revealed that higher aluminium content decreases the grain size and increases the volume of Mg(17)Al(12)precipitations. From the tensile test, AZ61 demonstrated higher yield stress and tensile strength while maintaining the elongation as compared to AZ31. The work hardening rate for AZ61 was also greater as compared to that of AZ31.
引用
收藏
页码：35 / 39
页数：5
相关论文
共 50 条
  • [1] Microstructures and tensile properties of ECAE processed Mg-Al-Zn alloys
    Yoshida, Y.
    Yamada, H.
    Kamado, S.
    Kojima, Y.
    Keikinzoku/Journal of Japan Institute of Light Metals, 2001, 51 (10): : 556 - 562
  • [2] EFFECT OF COPPER ON THE STRUCTURE AND PROPERTIES OF MG-AL-ZN ALLOYS
    EZHOV, AA
    LALAYAN, EA
    SHMUILOVICH, AR
    METAL SCIENCE AND HEAT TREATMENT, 1979, 21 (9-10) : 808 - 810
  • [3] Effect of composition on the microstructure and mechanical properties of Mg-Al-Zn alloys
    Liang, S. M.
    Ma, Y. Q.
    Chen, R. S.
    Han, E. H.
    MAGNESIUM TECHNOLOGY 2008, 2008, : 331 - 336
  • [4] Extruclability of Mg-Al-Zn alloys
    Murai, T
    Matsuoka, S
    Miyamoto, S
    Oki, Y
    MAGNESIUM ALLOYS 2003, PTS 1 AND 2, 2003, 419-4 : 349 - 354
  • [5] Effect of Cu content on recrystallization and tensile properties of Al-Zn-Mg-Cu alloys
    Zhang, Menghan
    Jiang, Jingyu
    Ma, Zhimin
    Wei, Weichang
    Liu, Shengdan
    MATERIALS CHARACTERIZATION, 2025, 220
  • [6] Mechanical properties of rapidly solidified Mg-Al-Zn alloys
    Daloz, D
    Michot, G
    Steinmetz, P
    INTERNATIONAL JOURNAL OF RAPID SOLIDIFICATION, 1996, 9 (03): : 171 - 186
  • [7] Superplastic properties of rapidly solidified Mg-Al-Zn alloys
    Kaneko, J
    Sugamata, M
    Hisata, N
    TOWARDS INNOVATION IN SUPERPLASTICITY II, 1999, 304-3 : 85 - 90
  • [8] Effect of Al and Zn content on the preparation of semisolid Mg-Al-Zn magnesium alloy
    Zhang, Qianqian
    Chen, Weirong
    MATERIALS, MECHANICAL AND MANUFACTURING ENGINEERING, 2014, 842 : 27 - 30
  • [9] Double extrusion of Mg-Al-Zn alloys
    Lu, Liwei
    Liu, Chuming
    Yin, Zhenru
    Zhao, Jun
    Gan, Lu
    Wang, Zhongchang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 89 (1-4): : 869 - 875
  • [10] Double extrusion of Mg-Al-Zn alloys
    Liwei Lu
    Chuming Liu
    Zhenru Yin
    Jun Zhao
    Lu Gan
    Zhongchang Wang
    The International Journal of Advanced Manufacturing Technology, 2017, 89 : 869 - 875
12345