SELECTIVE COMPOSITIONAL MIXING IN GAAS/ALGAAS SUPERLATTICE INDUCED BY LOW-DOSE SI FOCUSED ION-BEAM IMPLANTATION

被引:12
|
作者
CHEN, P
STECKL, AJ
机构
[1] Nanoelectronics Laboratory, Department of Electrical and Computer Engineering, University of Cincinnati, Cincinnati
关键词
D O I
10.1063/1.359203
中图分类号
O59 [应用物理学];
学科分类号
摘要
The Al-Ga interdiffusion induced by Si focused ion beam implantation and subsequent rapid thermal annealing (RTA) was investigated in an Al 0.3Ga0.7As/GaAs superlattice structure with equal 3.5 nm barrier and well widths. Si++ was accelerated to either 50 or 100 kV and implanted parallel to sample normal at doses ranging from 1013 to 1015/cm2. The effect of rapid thermal anneal of 10 s at 950°C was characterized by the secondary ion mass spectrometry technique. In the implanted region, the interdiffusion causing compositional mixing was significantly enhanced by the Si implantation. An ion dose as low as 1×1014/cm2 results in a two-order of magnitude increase in the interdiffusion coefficient, to a value of 4.5×10 -14 cm2/s, producing a mixing effectiveness of ∼90%. In contrast, the RTA-only case produces an interdiffusion coefficient of 1.3×10-16 cm2/s and very little mixing. A strong depth dependence of the mixing process was observed at 100 keV implantation energy, with a "pinch-off" (more heavily mixed) region being formed at a certain depth. It is noticed that the depth where this enhancement occurred is not associated with either the maximum concentration of Si ions or of vacancies. Instead, it coincides with the positive maximum of the second derivative of the vacancy profile, which in turn represents a maximum in the vacancy injection generated by the presence of a transient vacancy concentration gradient. Based on these findings, a theoretical model was developed using vacancy injection as responsible for mixing. © 1995 American Institute of Physics.
引用
收藏
页码:5616 / 5624
页数:9
相关论文
共 50 条
  • [41] ION-BEAM MILLING-INDUCED DAMAGE IN ALGAAS GAAS ALGAAS SINGLE QUANTUM-WELL
    SWAMINATHAN, V
    PRZYBYLEK, GJ
    GUTH, G
    ASOM, MT
    ELECTRONICS LETTERS, 1991, 27 (25) : 2320 - 2322
  • [42] LOW-TEMPERATURE ION-BEAM MIXING OF CO/SI SYSTEMS
    VANTOMME, A
    LANGOUCHE, G
    HYPERFINE INTERACTIONS, 1992, 70 (1-4): : 913 - 916
  • [43] FABRICATION OF VISIBLY PHOTOLUMINESCENT SI MICROSTRUCTURES BY FOCUSED ION-BEAM IMPLANTATION AND WET ETCHING
    XU, J
    STECKL, AJ
    APPLIED PHYSICS LETTERS, 1994, 65 (16) : 2081 - 2083
  • [44] TWO-DIMENSIONAL DISTRIBUTIONS OF SECONDARY DEFECTS IN FOCUSED ION-BEAM IMPLANTATION INTO SI
    TAMURA, M
    SHUKURI, S
    MADOKORO, Y
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 1988, 6 (03): : 996 - 1000
  • [45] EFFECT OF DOSE-RATE ON ION-BEAM MIXING IN NB-SI
    BANWELL, T
    NICOLET, MA
    AVERBACK, RS
    THOMPSON, LJ
    APPLIED PHYSICS LETTERS, 1986, 48 (22) : 1519 - 1521
  • [46] INTERDIFFUSION OF GAAS/GAALAS QUANTUM-WELLS ENHANCED BY LOW-ENERGY GALLIUM FOCUSED ION-BEAM IMPLANTATION
    BENASSAYAG, G
    VIEU, C
    GIERAK, J
    PLANEL, R
    SCHNEIDER, M
    MARZIN, JY
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 1991, 9 (05): : 2679 - 2682
  • [47] PLANAR-TYPE GAAS AVALANCHE PHOTODETECTOR FABRICATED BY FOCUSED GA ION-BEAM IMPLANTATION
    HIRAYAMA, Y
    IGUCHI, H
    OKAMOTO, H
    IEEE TRANSACTIONS ON ELECTRON DEVICES, 1986, 33 (11) : 1863 - 1863
  • [48] MONTE-CARLO SIMULATION OF THE MIXING EFFECT INDUCED BY ION-BEAM IMPLANTATION
    IDO, S
    MIYAMA, A
    OGATA, K
    SURFACE & COATINGS TECHNOLOGY, 1994, 66 (1-3): : 453 - 457
  • [49] Surface topology of GaAs(100) after focused ion beam implantation of Si++
    Schmuki, P
    Erickson, LE
    Champion, G
    Mason, BF
    Fraser, J
    Moessner, C
    APPLIED PHYSICS LETTERS, 1997, 70 (10) : 1305 - 1307
  • [50] Patterning at nanoscale with low-dose focused ion beam and chemical etching
    Stanishevsky, A
    Melngailis, J
    NONTRADITIONAL APPROACHES TO PATTERNING, 2004, : 129 - 131