Optical study on characteristics of non-reacting and reacting diesel spray with different strategies of split injection

被引:35
|
作者
Desantes, Jose M. [1 ]
Garcia-Oliver, Jose M. [1 ]
Garcia, Antonio [1 ]
Xuan, Tiemin [1 ,2 ]
机构
[1] Univ Politecn Valencia, CMT Motores Term, Valencia, Spain
[2] Jiangsu Univ, Sch Energy & Power Engn, 301 Xuefu Rd, Zhenjiang 212013, Jiangsu, Peoples R China
关键词
Diesel spray; split injection; vapor penetration; ignition delay; soot; MULTIPLE INJECTIONS; RADIAL EXPANSION; TIP PENETRATION; 1D MODEL; SOOT; COMBUSTION; EMISSIONS; METHODOLOGY; DENSITY; NOISE;
D O I
10.1177/1468087418773012
中图分类号
O414.1 [热力学];
学科分类号
摘要
Even though studies on split-injection strategies have been published in recent years, there are still many remaining questions about how the first injection affects the mixing and combustion processes of the second one by changing the dwell time between both injection events or by the first injection quantity. In this article, split-injection diesel sprays with different injection strategies are investigated. Visualization of n-dodecane sprays was carried out under both non-reacting and reacting operating conditions in an optically accessible two-stroke engine equipped with a single-hole diesel injector. High-speed Schlieren imaging was applied to visualize the spray geometry development, while diffused background-illumination extinction imaging was applied to quantify the instantaneous soot production (net result of soot formation and oxidation). For non-reacting conditions, it was found that the vapor phase of second injection penetrates faster with a shorter dwell time and independently of the duration of the first injection. This could be explained in terms of one-dimensional spray model results, which provided information on the local mixing and momentum state within the flow. Under reacting conditions, interaction between the second injection and combustion recession of the first injection is observed, resulting in shorter ignition delay and lift-off compared to the first injection. However, soot production behaves differently with different injection strategies. The maximum instantaneous soot mass produced by the second injection increases with a shorter dwell time and with longer first injection duration.
引用
收藏
页码:606 / 623
页数:18
相关论文
共 50 条
  • [21] Experimental Study of High-Pressure Reacting and Non-reacting Sprays for Various Gasoline Blends
    Ullal, Ankith
    Lehnert, Bastian
    Zhu, Shengrong
    Revidat, Stephan
    Shirley, Mark
    Ha, Kyoung Pyo
    Wensing, Michael
    Ullrich, Johannes
    SAE INTERNATIONAL JOURNAL OF FUELS AND LUBRICANTS, 2024, 17 (02)
  • [22] Numerical investigation of transverse sonic injection in a non-reacting supersonic combustor
    Manna, P
    Chakraborty, D
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2005, 219 (G3) : 205 - 215
  • [23] Experimental study of liquid-vapor mass transfer in non-reacting and reacting droplet chains
    Stoehr, Michael
    Werner, Stefanie
    Meier, Wolfgang
    28TH CONFERENCE ON LIQUID ATOMIZATION AND SPRAY SYSTEMS, ILASS-EUROPE 2017, 2017, : 738 - 745
  • [24] Study on Reacting Spray Characteristics of a Blend Fuel with Hydrogenation Catalytic Biodiesel and Diesel
    Mi Y.
    Xuan T.
    He Z.
    Lu P.
    Zhong W.
    Wang Q.
    Neiranji Xuebao/Transactions of CSICE (Chinese Society for Internal Combustion Engines), 2021, 39 (04): : 314 - 319
  • [25] A study of fuel spray simulations under non-reacting condition in a constant volume chamber by LES
    Plengsa-ard, Chalermpol
    Kaewbumrung, Mongkol
    Pichetpinyo, Sompong
    2018 THIRD INTERNATIONAL CONFERENCE ON ENGINEERING SCIENCE AND INNOVATIVE TECHNOLOGY (ESIT), 2018,
  • [26] Numerical simulation of non-reacting diesel fuel sprays under low temperature late injection operating condition
    Maghbouli, Amin
    Lucchini, Tommaso
    D'Errico, Gianluca
    Onorati, Angelo
    69TH CONFERENCE OF THE ITALIAN THERMAL ENGINEERING ASSOCIATION, ATI 2014, 2015, 81 : 960 - 966
  • [27] Large Eddy Simulation of the PVC Behavior in both Non-Reacting and Reacting Flows with Different Reynold Numbers
    Li, Shi
    Zhongguang, Fu
    Yazhou, Shen
    Ruixin, Wang
    Hui, Zhang
    INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY, 2016, 34 (03) : 429 - 438
  • [28] EFFECT OF INJECTION RATE SHAPING OVER DIESEL SPRAY DEVELOPMENT IN NON REACTING EVAPORATIVE CONDITIONS
    Payri, Raul
    Gimeno, Jaime
    Bardi, Michele
    Plazas, Alejandro
    PROCEEDINGS OF THE ASME INTERNAL COMBUSTION ENGINE DIVISION SPRING TECHNICAL CONFERENCE 2012, 2012, : 347 - +
  • [29] Experimental characterization of direct injection liquid ammonia sprays under non-reacting diesel-like conditions
    Payri, Raul
    Garcia-Oliver, JoseM.
    Bracho, Gabriela
    Cao, Jiawei
    FUEL, 2024, 362
  • [30] CHARACTERIZATION OF SPRAY FIELD FOR WATER-EMULSIFIED DIESEL USING A PRESSURE SWIRL ATOMIZER UNDER A NON-REACTING ENVIRONMENT
    Suleiman, Baha
    Selim, Hatem
    Dawood, Alaaeldin
    Song, Jinkwan
    Lee, Jong Guen
    Khalidi, Abdurrahman
    Al-Ahmadi, Kamal
    Al-Ghamdi, Ibrahim
    Badr, Eid
    Al-Gahatani, Mohammed
    PROCEEDINGS OF ASME TURBO EXPO 2023: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2023, VOL 2, 2023,