Pre-conceptual design of automated systems for SRF cavity assembly and optical inspection

被引：0
|
作者：
Harden, T. [1 ]
Borden, M. [1 ]
Canabal, A. [1 ]
Pittman, P. [1 ]
Tajima, T. [1 ]
机构：
[1] Los Alamos Natl Lab, Los Alamos, NM 87544 USA
来源：
2007 IEEE PARTICLE ACCELERATOR CONFERENCE, VOLS 1-11 | 2007年
关键词：
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The International Linear Collider (ILC) will require similar to 20,000 Superconducting Radio-Frequency (SRF) cavities. Improving the yield of high-gradient (>35 MV/m) cavities is currently one of the most critical issues for the ILC. LANL has been tasked to analyze SRF cavity failure and feedback the results to industry and academia. We have started a pre-conceptual design of an automated system for assembling and sealing the flanges on SRF cavities after high-pressure rinsing in a clean room. This should reduce particle contamination due to touch labor. We have also started a pre-conceptual design of an automated system to optically inspect precise locations (determined during testing) on the inner surface of SRF cavities for defects or contamination. This inspection will allow us to understand why a particular SRF cavity is substandard and potentially repair it. Using both automated systems should lead to field emission free cavities and higher yield of high-gradient cavities.
引用
收藏
页码：4165 / 4167
页数：3
相关论文
共 50 条
  • [21] Development of pre-conceptual ITER-type ICRF antenna design for DEMO
    Bobkov, V.
    Usoltceva, M.
    Faugel, H.
    Kostic, A.
    Maggiora, R.
    Milanesio, D.
    Maquet, V.
    Ochoukov, R.
    Tierens, W.
    Zeus, F.
    Zhang, W.
    NUCLEAR FUSION, 2021, 61 (04)
  • [22] Pre-conceptual design of the steering mirror for the DEMO electron cyclotron heating system
    Sanchez, Avelino Mas
    Chavan, Rene
    Birlan, Daniel
    Goodman, Timothy P.
    Hogge, Jean-Philippe
    Borderas, Cinta Marraco
    Xydou, Anastasia
    FUSION ENGINEERING AND DESIGN, 2024, 199
  • [23] Inspection and repair strategy in automated assembly systems
    Yamashina, H.
    Mizuyama, H.
    Journal of Quality in Maintenance Engineering, 1998, 4 (02): : 95 - 106
  • [24] Inspection and repair strategy in automated assembly systems
    Yamashina, Hajime
    Mizuyama, Hajime
    Kurimoto, Makoto
    Shibuya, Masahiko
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 1995, 61 (07): : 949 - 953
  • [25] EU-DEMO divertor: Cassette design and PFCs integration at pre-conceptual stage
    Bonavolonta, Ugo
    Bachmann, Christian
    Coccorese, Domenico
    Di Gironimo, Giuseppe
    Imbriani, Vito
    Marzullo, Domenico
    Mazzone, Giuseppe
    Vorpahl, Christian
    You, Jeong-Ha
    FUSION ENGINEERING AND DESIGN, 2020, 159
  • [26] Conceptual design of a high real-estate gradient cavity for a SRF ERL
    Xu, Chen
    Ben-Zvi, Ilan
    Hao, Yue
    Xin, Tianmu
    Wang, Haipeng
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2017, 869 : 128 - 134
  • [27] Automated conceptual design of structural systems
    Grierson, DE
    ADVANCES IN COMPUTATIONAL STRUCTURES TECHNOLOGY, 1996, : 157 - 161
  • [28] Dose rate analysis for a pre-conceptual design of the high energy beam transport section in the IBTF
    Hong, SeongHee
    Kwon, Sungjin
    Ahn, Mu -Young
    Gwon, Hyoseong
    Kim, Hyun Wook
    Moon, Sungbo
    Her, NamIl
    Cho, Seungyon
    FUSION ENGINEERING AND DESIGN, 2023, 189
  • [29] A KB CAAD system for the pre-conceptual design of bio-climatic and low energy buildings
    Yezioro, A
    Shaviv, E
    CAAD FUTURES 1997, 1997, : 317 - 330
  • [30] Development of Automated Optical Inspection and Classification Systems
    Tsai, Pu-Sheng
    Wu, Ter-Feng
    Chen, Jen-Yang
    Tsai, Chia-Luen
    SENSORS AND MATERIALS, 2022, 34 (10) : 3895 - 3910
12345