Effect of ultrasonic transmission rate on microstructure and properties of the ultrasonic-assisted brazing of Cu to alumina

被引：19
|
作者：
Ji, Hongjun [1 ,2 ]
Chen, Hao [1 ]
Li, Mingyu [1 ,2 ]
机构：
[1] Harbin Inst Technol, State Key Lab Adv Welding & Joining, 92 Xidazhi St, Harbin 150001, Peoples R China
[2] Harbin Inst Technol, State Key Lab Adv Welding & Joining, Shenzhen Grad Sch, HIT Campus, Shenzhen 518055, Peoples R China
来源：
ULTRASONICS SONOCHEMISTRY | 2017年 / 34卷
关键词：
Ceramics; Ultrasonic brazing; Microstructure; Shear strength; Heat dissipation; ZN-AL ALLOY; CERAMICS; BEHAVIOR; METALS;
D O I：
10.1016/j.ultsonch.2016.06.031
中图分类号：
O42 [声学];
学科分类号：
070206 ; 082403 ;
摘要：
Fluxless brazing of bare alumina with Cu was conducted with an ultrasonic-assisted brazing technique by a Zn-14wt.%Al filler. The shear strength of Cu/alumina joints (84 MPa) exhibited 27% larger than the alumina/Cu joints (66 MPa) due to different intermetallic phases and their morphologies formed in the seam under the same parameters, which are probably attributed to the transmission rate of ultrasonic energy varying with density of the ultrasonic horn-contacted materials. Overgrowth of stalactite-like CuZn5 contributes to better thermal dissipation of the ultrasonic-assisted brazed Cu/alumina joints. (C) 2016 Elsevier B.V. All rights reserved.
引用
收藏
页码：491 / 495
页数：5
相关论文
共 50 条
  • [21] Microstructure and mechanical properties of Cu/Sn-In/Cu joints obtained by ultrasonic-assisted transient liquid phase bonding in air
    Bi, Yan
    Nie, Yong
    Wang, Qian
    Han, Jian
    Cai, Yangchuan
    ADVANCES IN MECHANICAL ENGINEERING, 2020, 12 (10)
  • [22] Ultrasonic-assisted alkali hydrolysis of polyethylene terephthalate fabric and its effect on the microstructure and dyeing properties of fibers
    Pan, Sihui
    Qian, Hongfei
    AUTEX RESEARCH JOURNAL, 2024, 24 (01)
  • [23] Effect of pH on Microstructure and Properties of Ultrasonic-Assisted Electroless Ni-P Coatings on Titanium Alloy
    Cao, Jingjing
    Wang, Xiaoyu
    Zhao, Wenwu
    Zhao, Yifan
    Wang, Jinyong
    Jiang, Wentao
    Song, Guangming
    INTEGRATED FERROELECTRICS, 2022, 225 (01) : 255 - 265
  • [24] Microstructure and mechanical properties of Ti-6Al-4V/Al1060 joints by ultrasonic-assisted brazing in air
    Chen, Xiaoguang
    Yan, Jiuchun
    Ren, Sichao
    Wei, Jinghui
    Wang, Qian
    MATERIALS LETTERS, 2013, 95 : 197 - 200
  • [25] Investigation on the effect of cavitation in ultrasonic-assisted AWJ
    Lv, Zhe
    Hou, Rongguo
    Zhang, Yu
    Chen, Xuesong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 106 (9-10): : 3823 - 3830
  • [26] Investigation on the effect of cavitation in ultrasonic-assisted AWJ
    Zhe Lv
    Rongguo Hou
    Yu Zhang
    Xuesong Chen
    The International Journal of Advanced Manufacturing Technology, 2020, 106 : 3823 - 3830
  • [27] Preliminary Investigation on Ultrasonic-Assisted Brazing of Titanium and Titanium/Stainless Steel Joints
    Elrefaey, A.
    Wojarski, L.
    Pfeiffer, J.
    Tillmann, W.
    WELDING JOURNAL, 2013, 92 (05) : 148S - 153S
  • [28] Effect of ultrasonic parameters on microstructure and mechanical properties of non-contact ultrasonic-assisted laser metal deposition of Fe-based powder
    Li, Huachen
    Cui, Li
    He, Dingyong
    Shi, Zhenfu
    Bu, Fanhui
    Cao, Qing
    Wan, Shengjun
    OPTICS AND LASER TECHNOLOGY, 2024, 176
  • [29] Interface microstructure and strengthening mechanism of Cu/Al dissimilar metal joint by ultrasonic-assisted soldering
    Zhang, Huiwen
    Cui, Wei
    Yan, Jiuchun
    Hanjie Xuebao/Transactions of the China Welding Institution, 2015, 36 (01): : 101 - 104
  • [30] Interfacial microstructure evolution and mechanical properties of Al/Sn joints by ultrasonic-assisted soldering
    Guo, Wei-bing
    Luan, Tian-min
    Leng, Xue-song
    He, Jing-shan
    Yan, Jiu-chun
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2017, 27 (04) : 962 - 970
12345