Finite Element Analysis of Delamination Behaviors of Composite Laminates under Hygrothermal Environment Using Virtual Crack Closure Technique

被引：5
|
作者：
Li, J. G. [1 ]
Liu, P. F. [2 ]
Chu, J. K. [1 ]
机构：
[1] Zhejiang Univ, Sch Energy Engn, Inst Chem Machinery & Proc Equipment, Hangzhou 310027, Peoples R China
[2] Zhejiang Univ, Ocean Coll, Zhoushan 316021, Peoples R China
来源：
JOURNAL OF FAILURE ANALYSIS AND PREVENTION | 2019年 / 19卷 / 01期
关键词：
Delamination; Hygrothermal environment; Composite laminates; Virtual crack closure technology (VCCT); Finite element analysis (FEA); LEG BENDING TEST; INTERLAMINAR FRACTURE; PART I; TOUGHNESS; DAMAGE;
D O I：
10.1007/s11668-019-00582-5
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This research aims to study the delamination behaviors of T700/8911 composite laminates under hygrothermal environment. For two mixed-mode I/II delamination specimens: single-leg bending delamination and over-leg bending delamination, finite element analysis using virtual crack closure technique as a ABAQUS module is comparatively performed to study the delamination growth and load responses, in which different delamination growth criteria are used. Mechanical tests and analytical solutions for two kinds of specimens are used to get the delamination fracture toughness. Results show that hygrothermal environment decreases the load-bearing ability and delamination resistance to some extent. This work provides a new thread for studying the delamination mechanisms of composite laminates under hygrothermal environment.
引用
收藏
页码：147 / 153
页数：7
相关论文
共 50 条
  • [21] The enriched finite element method-virtual crack closure technique for cracked structures
    Zhou, Liming
    Wang, Jiye
    Wang, Yajin
    Li, Xintong
    Chai, Yingbin
    THIN-WALLED STRUCTURES, 2023, 187
  • [22] Application of scaled boundary finite element method for delamination analysis of composite laminates using cohesive zone modelling
    Garg, Nikhil
    Prusty, B. Gangadhara
    Ooi, Ean Tat
    Song, Chongmin
    Pearce, Garth
    Phillips, Andrew W.
    COMPOSITE STRUCTURES, 2020, 253
  • [23] Analysis of Flip-Chip Corner Delamination using 3-D Virtual Crack Closure Technique
    Chiu, Tz-Cheng
    Lin, Huang-Chun
    Yang, Hung-Chun
    2008 EMAP CONFERENCE PROCEEDINGS, 2008, : 157 - 160
  • [24] Finite Element Analysis of Single-Leg Bending Delamination of Composite Laminates Using a Nonlinear Cohesive Model
    Liu P.F.
    Gu Z.P.
    Journal of Failure Analysis and Prevention, 2015, 15 (06) : 846 - 852
  • [25] A mesh generation technique for three dimensional crack propagation analysis using virtual crack closure-integral method (VCCM) and tetrahedral finite element
    Graduate School of Science and Engineering, Kagoshima University, 1-21-40 Korimoto, Kagoshima-shi, Kagoshima, 890-0065, Japan
    Nihon Kikai Gakkai Ronbunshu A, 2008, 6 (819-826):
  • [26] Finite element reliability analysis of edge delamination onset due to interlaminar stresses in composite laminates
    Delbariani-Nejad, Ali
    Farrokhabadi, Amin
    Fotouhi, Mohammad
    COMPOSITE STRUCTURES, 2022, 288
  • [27] Finite element analysis of delamination of a composite component with the cohesive zone model technique
    Lampani, Luca
    ENGINEERING COMPUTATIONS, 2011, 28 (1-2) : 30 - 46
  • [28] MODIFIED VIRTUAL CRACK-CLOSURE TECHNIQUE USING SPECTRAL ELEMENT METHOD
    Kumar, A.
    Gopalakrishnan, S.
    Chakraborty, A.
    INTERNATIONAL JOURNAL OF COMPUTATIONAL METHODS, 2007, 4 (01) : 109 - 139
  • [29] Nonlinear finite element analysis of laminated composite doubly curved shells in hygrothermal environment
    Kundu, C. K.
    Maiti, D. K.
    Sinha, P. K.
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2007, 26 (14) : 1461 - 1478
  • [30] Delamination analysis of carbon fiber composites under hygrothermal environment using acoustic emission
    Liu, Peng-fei
    Yang, Jun
    Peng, Xiong-qi
    JOURNAL OF COMPOSITE MATERIALS, 2017, 51 (11) : 1557 - 1571
12345