Static and dynamic failure behaviour of bolted joints in carbon fibre composites

被引：66
|
作者：
Heimbs, Sebastian [1 ]
Schmeer, Sebastian [2 ]
Blaurock, Joerg [2 ]
Steeger, Stefan [3 ]
机构：
[1] EADS Innovat Works, D-81663 Munich, Germany
[2] Kaiserslautern Univ Technol, Inst Verbundwerkstoffe GmbH, D-67663 Kaiserslautern, Germany
[3] INVENT GmbH, D-38112 Braunschweig, Germany
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2013年 / 47卷
关键词：
Carbon fibre; Strength; Mechanical testing; Joints/joining; MECHANICALLY FASTENED JOINTS; PULL-THROUGH FAILURE; RIVETED JOINTS; STRENGTH PREDICTION; PROGRESSIVE DAMAGE; NUMERICAL-ANALYSIS; FINITE-ELEMENT; STRESS; DESIGN; SHEAR;
D O I：
10.1016/j.compositesa.2012.12.003
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An experimental test series of mechanically fastened bolted joints with countersunk head in quasi-isotropic carbon/epoxy composite laminates under quasi-static and dynamic loads with velocities up to 10 m/s has been conducted in order to investigate potential strain rate effects on the failure behaviour. The test campaign covered bolt pull-through tests, single lap shear tests with one and two bolts and coach peel tests. Identical test equipment has been used for the whole range of test velocities to avoid influences of different test machines. No rate sensitivity occurred for most test configurations. Only the single lap shear tests with two bolts showed a change of failure mode at the highest test velocity enabling higher energy absorption. (c) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：91 / 101
页数：11
相关论文
共 50 条
  • [21] Numerical Investigation of Dynamically Loaded Bolted Joints in Carbon Fibre Composite Structures
    Pearce, Garth M.
    Johnson, Alastair F.
    Thomson, Rodney S.
    Kelly, Donald W.
    APPLIED COMPOSITE MATERIALS, 2010, 17 (03) : 329 - 346
  • [22] Experimental Investigation of Dynamically Loaded Bolted Joints in Carbon Fibre Composite Structures
    Pearce, Garth M.
    Johnson, Alastair F.
    Thomson, Rodney S.
    Kelly, Donald W.
    APPLIED COMPOSITE MATERIALS, 2010, 17 (03) : 271 - 291
  • [23] Static and dynamic behaviour of composite riveted joints in tension
    Li, QM
    Mines, RAW
    Birch, RS
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2001, 43 (07) : 1591 - 1610
  • [24] Failure analysis and behaviour of titanium alloy metal matrix composite bolted joints
    Soni, SR
    Kilic, H
    Camden, M
    Derriso, MM
    Cunningham, S
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2004, 21 (1-3): : 41 - 58
  • [25] Behaviour of bolted cast iron joints
    Tsiampousi, Aikaterini
    Yu, Jessica
    Standing, Jamie
    Vollum, Robert
    Potts, David
    TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY, 2017, 68 : 113 - 129
  • [26] Static and fatigue testing bolted, bonded and hybrid step lap joints of thick carbon fibre/epoxy laminates used on aircraft structures
    Chowdhury, Nabil M.
    Wang, John
    Chiu, Wing Kong
    Chang, Paul
    COMPOSITE STRUCTURES, 2016, 142 : 96 - 106
  • [27] Flexural behaviour of pultruded glass fibre reinforced polymer composite beams with bolted splice joints
    Turvey, Geoffrey John
    Cerutti, Xavier
    COMPOSITE STRUCTURES, 2015, 119 : 543 - 550
  • [28] Quasi-static bearing failure of CFRP composite in biaxially loaded bolted joints
    Kapidzic, Zlatan
    Ansell, Hans
    Schon, Joakim
    Simonsson, Kjell
    COMPOSITE STRUCTURES, 2015, 125 : 60 - 71
  • [29] Failure Modelling of Woven GFRP Bolted Joints under Quasi-Static Loading
    Ahmad, Mohd Hilton
    Crocombe, Andrew D.
    Smith, Paul A.
    INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2013, 5 (02): : 32 - 36
  • [30] Efficient Finite Element Modelling for the Investigation of the Dynamic Behaviour of a Structure with Bolted Joints
    Omar, R.
    Rani, M. N. Abdul
    Yunus, M. A.
    Mirza, W. I. I. Wan Iskandar
    Zin, M. S. Mohd
    INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONICS, MATERIALS AND APPLIED SCIENCE, 2018, 1952
12345